BendPak HD-9SW-E 9,000 Lb. Capacity, Extra Wide 4-Post lift
9,000-lb. Capacity / Four-Post Lift / Dual Platform / EXTRA WIDE
To accommodate extra-wide vehicles on a 9K capacity four post lift, choose the HD-9SW-E.
We also offer a variety that offers 82” of overhead clearance: the HD-9SWX. The “SW” stands for super-wide, and it’s the ideal car lift to double your parking and/or service wider vehicle types. The taller “X” model is also idea for taller wrenchers looking for a little more headroom underneath. The extra overhead also makes it possible to park higher-clearance vehicles.
Features
- Standard rise.
- Shorter runway for smaller spaces.
- Runways accommodate wide or narrow vehicles.
- Runways include rail kit for optional accessories.
- Electric / hydraulic power system.
- Single hydraulic cylinder mounted underneath runway.
- Fully enclosed lifting cables, safety locks and sheaves.
- Internal anti-sway slider blocks in each column.
- Oversized self-lubricating cable rollers.
- Oversized sheave diameter reduces cable fatigue.
- High-speed lifting.
- Features heavy-duty 3/8" aircraft cable.
- Rugged 1.25" roller axles.
- Multi-position safety locks in each column.
- Adjustable lock ladders.
- Runways feature non-skid surface.
- Push-button pneumatic safety release.
- Independent backup slack-cable safety latches.
- Inside runways adjust for different tread widths.
- Customizable power unit location.
- Removable approach ramps for additional drive-under clearance.
- Optional drive-thru ramps available.
- Optional drip trays available.
- Optional solid deck available to increase storage capacity.
- Optional 4,500-lb. air / hydraulic rolling jacks available.
Specifications
| Model | HD-9SW-E |
| Lifting capacity¹ | 9,000 lbs. / 4,082 kg |
| A Overall width² | 248" / 6,299.2 mm |
| B Outside length | 174" / 4,418 mm |
| C Overall length | 218.5" / 5,549.1 mm |
| D Post height | 90" / 2,282 mm |
| E Maximum rise | 77" / 1,957 mm |
| F Maximum lifting height | 72.3" / 1,836 mm |
| G Distance between Posts | 238" / 6,046 mm |
| H Runway width | 19" / 482 mm |
| I Width between Runways | 34.30" min. – 41" max. 871 mm – 1,039 mm |
| J Runway length | 164.5" / 4,178 mm |
| K Maximum height below ramp | 70.10" / 1,781 mm |
| Min. wheelbase @ rated capacity³ | 115" / 2,921 mm |
| Min. wheelbase @ 75 capacity³ | 100" / 2,540 mm |
| Min. wheelbase @ 50 capacity³ | 85" / 2,159 mm |
| Min. wheelbase @ 25 capacity³ | 70" / 1,778 mm |
| Locking positions | 14; spaced every 4" / 102 mm |
| Lifting time | 55 seconds |
| Motor | 220 VAC, 60 Hz, 1 Ph (special voltages available upon request) |
1 The combined weight for both Vehicles on the Runways cannot exceed 9,000 lbs.
2 Overall Width is defined as the dimension outside-to-outside of the Baseplates. Use the Overall Width listed here for creating chalk lines.
3 The Runways supports less weight than its rated capacity if the Vehicle’s wheelbase is shorter; this is because the wheels are closer to the middle of the Runways, where there is less strength. For example, the maximum weight allowed on the Lift for a Vehicle with a wheelbase of 85" is 50 percent of the Lift’s rated capacity (or 4,500 lbs when the rated capacity is 9,000 lbs).
*Specifications subject to change without notice.
Optional Accessories (*Sold separately)
 |  |  |  | |||
| WSA-100 | Plastic Drip Trays | Rolling Jacks | Sliding Jack Platform |
