Ranger LS45DS Wheel Balancer Sonar 3D Laser-Spot / Includes Flange Press Plate / 208-240V
The Ranger LS45DS Sonar Wheel Balancer is the latest innovation in wheel balancing technology, designed to revolutionize the way automotive shops approach balancing jobs. From its advanced 3D Auto Data Entry for wheel parameter settings to its Laser-Spot technology for precise wheel weight placement, the LS45DS brings a level of speed, accuracy, and user-friendliness that makes it indispensable for high-volume and specialty shops alike. Handling wheels 12" to 24" in diameter, this isn’t just another wheel balancer— it's a complete system engineered to maximize productivity, minimize mistakes, and enhance customer satisfaction.
Features
- Dynamic, static, aluminum, HID (hidden) balancing.
- Multi-user save function holds presets to increase productivity.
- 3D Auto Data Entry for wheel parameter settings.
- Laser-Spot technology for precise wheel weight placement.
- Side-position brake holds wheels at precisely 12 o’clock or 6 o’clock for proper weight placement.
- Open-side hood design allows for a broader coverage of tire shapes and sizes.
- Ergonomic control board and easy to read LED display.
- Automatic rolling wheel parameter setting feature saves time, minimizes errors.
- Low-RPM balancing speed.
- Rapid 7-second cycle time.
- Automatic braking.
- Gram/ounce selection and millimeter/inch selection.
- Automatic round-off with top-dead-center weight position indicator.
- Tiered weight placement indicators help identify out-of-sight position weight placements (such as split-weight or hidden “behind-the-spoke” techniques).
- Manual or automatic start when hood is lowered.
- Self-calibration function.
- High-volume top weight tray and side shelf storage gives you room to inventory a wide variety of wheel weights and tools.
- Side shelf with built-in weight dispenser accommodates Ranger Quick-Peel adhesive tape weight convenient bulk rolls.
- Precision-machined, hardened-steel 40 mm shaft.
- Quick-release hub nut for dramatically reduced set-up times.
Specifications
| Model | LS45DS |
| Motor | 208-240V, 1-Ph, 50/60Hz |
| Drive system | Belt Drive |
| Working temperature | 27°F – 82°F (-5°C – 50°C) |
| Operating temperature | 41°F – 122°F (5°C – 50°C) |
| Balancing modes | 1 dynamic / 1 static / 3 aluminum alloy / 1 hidden |
| Maximum tire diameter | 31.5" (800 mm) |
| Maximum wheel weight | 145 lbs. (65 kg) |
| Max. wheel diameter | 12" – 24" (305 mm – 610 mm) |
| Wheel width capacity | 4" – 20" (102 mm – 508 mm) |
| Balancing increments | 0.01 oz (0.25 grams) or 0.25 oz |
| Accuracy | ± .035 oz (1 gram) |
| Resolution | .25 oz (5 grams) |
| Balancing speed | 180 RPM |
| Top weight locator (12 o’clock) | Standard |
| Bottom weight locator (6 o’clock) | Standard |
| Height, Guard Up | 66" (1,676 mm) |
| Height, Guard Down | 53" (1,346 mm) |
| Width | 54" (1,371 mm) |
| Depth, Cover Up | 39" (990 mm) |
| Depth, Cover Down | 40" (1,016 mm) |
| Power Cord Length | 63" (1,600 mm) |
| Inside & outside measuring | Standard |
| Millimeter / inches selection | Standard |
| Ounce / gram selection | Standard |
| Wheel offset distance setting | Standard |
| Self-calibration function | Standard |
| Auto start | Standard |
| Wheel spin braking | Automatic / Electronic |
| Wheel holding manual brake pedal | Standard |
| Centering cones included | 3 Standard / 1 Truck |
| Wheel calipers | Standard |
| Rear cone mount spring | Standard |
| No-mar rear cone mount pressure cup | Standard |
| Quick-release & mount hub nut | Standard |
| Shipping Weight | 418 lbs. (190 kg) |
| Shipping Dimensions | 44" x 30" x 46" (1,117 mm x 762 mm x 1,168 mm) |
WARNING: California Prop 65
Downloads
**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.
SHOP EQUIPMENT WARRANTY
THE BEST WARRANTY IN THE BUSINESS - YOU HAVE OUR WORD
Duration: From the date of purchase by the original Purchaser or 12 months from the date of shipment or whichever comes first.
- One Year (12-Months) Warranty on equipment structure*
- One Year (12-Months) Warranty on operating components
- One Year (12-Months) Free-Shipping** on ground?freight charges related to warranty performance
Limited Warranty:
1. Who gives this warranty (Warrantor): BendPak/Ranger, 1645 Lemonwood Dr., Santa Paula, CA 93060
2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
3. What products are covered by this warranty: Any Ranger brand Transmission Jack, Floor Jack, Motorcycle Lift Platform, Specialty Jack, Shop
Crane, Cart/Dolly, Jack Stand, Hydraulic Press, Hose Reel, Shop Equipment***
4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
5. What is not covered under this warranty:
a. Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
b. Any damage caused by using equipment beyond rated capacity and/or capability
c. Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
d. Items considered general wear parts such as rubber or plastic pads/protectors, worn casters/wheels, plastic trays, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
e. Any component damaged in shipment or any failure caused by installing or operating equipment under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
f. Any component failure caused by rain, excessive humidity, corrosive environments or other contaminants
g. Rusted components due to improper maintenance or corrosive environments
h. Cosmetic defects that do not interfere with product functionality
i. Damage due to incorrect voltage or improper wiring
j. Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of a Ranger product
k. All electrical components are guaranteed for one year against defects in workmanship and/or materials when the lift is installed and used according to specifications
6. Responsibilities of Warrantor under this warranty: Repair or replace with either new or reconditioned unit at Warrantor’s option, component and/or unit which is defective, has malfunctioned and/or failed to conform within duration of the warranty period.
7. Responsibilities of Purchaser under this warranty:
a. Provide dated proof of purchase and maintenance records
b. In some cases, components may be required to be shipped to the nearest BendPak/Ranger Authorized Service Center. Freight costs, after 12?months, must be borne by the Purchaser.
c. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
*Equipment structure is defined as any non?moving permanently affixed frame or main body, or sub?structures that are non?moving and permanently affixed or attached to any main equipment structure or frame. **Free?shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote addresses. ***For all Ranger brand Transmission Jack, Floor Jack, Motorcycle Lift Platform, Specialty Jack, Shop Crane, Cart/Dolly, Jack Stand, Hydraulic Press, Hose Reel, Shop Equipment, Work Bench manufactured on or following 11/1/2011.
Limitation of Liability:
BendPak/Ranger shall have no obligation pursuant to this Warranty with respect to products which in our sole judgment have been altered damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer or any other person other than an authorized representative of BendPak/Ranger has made any attempt to service or modify the tool prior to its return to BendPak/Ranger under this Warranty. In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damagesBendPak/Rangerproductsareprovidedandsoldasiswithoutanyexpressorimpliedwarrantiesincludingwarrantiesof merchantabilityorfitnessforparticularpurpose.No warranties, expressed or im
- Free Shipping:
- Yes
CALL US NOW
