GMC HBR-0625 6 ft x 1/4 in Plate Rolls - Metal Rolling Machines
Features
- ISO 9001 certified.
- All three rollers are driven.
- All three rollers are hardened, up to 50-52 HRC
- Easy swing –out top roller.
- Standard cone attachment installed.
- 1 each LED indicator for bending roll position.
- Safety line all around the machine for emergency stop.
- Heavy Duty all steel welded machine construction.
- German Hydraulic logic system centrally located and quiet.
- Bending roll is hydraulic powered up/down & tilting adjustment.
- Planetary reduction gear and pump.
- All three rolls are made of high grade alloy steel.
- All rolls run forward and reverse.
- Safety type foot pedal control.
- Overload protection and disconnect switch.
- Power source 208V/220V, (Option 460 V, 3 phase).
Specifications
| Roll Capacity: | |
| Mild Steel | 6' x 1/4" |
| Stainless Steel | 6' x 3/16" |
| Soft aluminum | 6' x 3/8" |
| Min. thickness | 22Ga |
| Min. Roll dia. | 8 1/2" |
| Rolls Length | 6' 8" |
| Rolls Dia. | 7 1/2" |
| Pre-bend | 0.18" |
| Rolls speed | 5 RPM |
| Rolls Opening | 3/4" |
| Oil Tank Cap. | 45L= 12 Gal |
| Main Motor | 5-1/2 HP 20A/220V or 10A/440V |
| Weight | 8350 lbs |
| Dimensions | 118" x 38" x 58" |
*Specifications are subject to change without notice.
Standard Equipment
- LED indicator for bending roll position.
- Safety line all around the machine for emergency stop.
- Removable safety foot pedal and tool box.
- Cone attachment (to make cone parts).
- (3) grooves 3/8”, 1/2”, 5/8” on roll for bending wire.
Downloads
Warranty Information
GMC Machine Tools Warranty
GMC warranties all machinery sold against failure of defective workmanship or materials which occurs after the product is professionally installed within product specifications and during normal use and operation for the period of one (1) year.
We will replace all parts, that our inspection shows to be defective from a manufacturing standpoint.
Warranty parts will be shipped free of charge to original purchaser.
Labor and or all travel expenses are not included in the warranty and will be charged additionally at market rate should on site repair be ever needed.
If Purchaser decides to return machines within the 1st 30 days of the purchase date, they may do so only with written agreement from GMC, freight prepaid. All machinery returned must be in same condition received.
After GMC inspects the machinery, equipment, GMC will charge a 35% restocking charge due to retuned machines can only be resold as PRE-OWNED OR DEMO WITH reduced market value and limited warranty.
GMC at no time will be liable for injuries, death, property damage, and any consequential damages that result from using our machinery, improper use, improper set up, and installation. Any legal action brought against GMC shall be tried in the State of California County of San Bernardino County.
GMC reserves the right to make specification changes at any time to better improve their product lines to continue to deliver the quality products our customers are used to.
Any machine that has a voltage change, phase converter installed after purchase, or if you forget to add oil into the machine will automatically void warranty. Buyer is fully responsible for parts and labor.
We truly hope you will never need to use this warranty and you have our commitment to work with you diligently If support is ever needed.
We look forward to being of service now and in the future.
