JET Tools IBG-8VSB 8" Variable Speed Industrial Buffer
*Image 2: DGB-lamp is Sold Separately.
*Image 3: IBG-Stand is Sold Separately.
The heavy-duty one-horsepower 8-inch Variable Speed Industrial Bench Buffer is engineered with a full casted body and loaded with safety innovations. The exclusive motor stop will reduce RPM speed from 3,600 to 0 in less than 20-seconds bringing the buffing wheel to a complete stop.
Features
- Massive cast iron body.
- Totally enclosed pre-lubricated ball bearings.
- CSA/US: Following strict guidelines and electrical requirements, this JET Industrial Buffer is CSA/US certified.
- Brake resistor added for rapid wheel stoppage.
- Rubber mounts prevent movement.
- Variable speed provides wide range of RPM’s.
Specifications
Model Number | IBG-8VSB |
Shaft Diameter (in.) | 5/8 |
Buffing Wheel Diameter (dia. x W /in.) | 8 x 1/2 |
Wheel Speed (rpm) | 900 - 3600 |
Buffing Wheel Type | Spiral/Half Spiral |
Motor (HP) | 1 HP, 115/230V , Single Phase, Pre-Wired 115V |
Overall Dimensions (L x W x H / in.) | 23-1/2 x 8 x 10-9/16 |
Net Weight (lbs.) | 40 |
WARNING: Cancer and Reproductive Harm
Downloads
WARRANTY INFORMATION
JET RED ASSURANCE 2-YEAR WARRANTY
JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET Tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
JET RED ASSURANCE 2-YEAR WARRANTY
JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET Tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.