Katool KT-AM120SD 12,000 lbs. Clear Floor 2 Post Lift with Direct Drive and Assym Arms
The Katool Automotive Equipment KT-AM120SD Two Post Lift is a heavy-duty, professional-grade lift built to handle demanding service work with strength, stability, and efficiency. With a 12,000 lb lifting capacity, this clear-floor two-post lift is designed to service a wide range of vehicles, including cars, trucks, and SUVs. Its asymmetric arm configuration helps improve vehicle positioning and door access, while the single-point lock release system supports convenient day-to-day operation.
Designed for commercial shops and serious service environments, the KT-AM120SD combines lifting power with practical usability. Public listings describe a 220V single-phase hydraulic system, with some sellers also noting an optional 110V configuration, plus a low 4.25–4.33 inch minimum pad height and approximately 70.86–70.87 inch maximum lifting height, making it suitable for both lower vehicles and taller service work.
Features
- 12,000 lb lifting capacity for cars, trucks, and SUVs.
- Asymmetric arm design for easier vehicle positioning and door clearance.
- Single-point lock release for efficient operation.
- Clear-floor design for improved workspace access under the vehicle.
- Low pad height for servicing a wider range of vehicles.
- Built for professional repair shops, service centers, and fleet use.
- Heavy-duty hydraulic lifting performance for daily shop operation.
Specifications
| Model | KT-AM120SD |
| Product Type | Two Post Lift |
| Lift Configuration | Clear-floor / asymmetric arms |
| Lifting Capacity | 12,000 lbs |
| Max. Lifting Height | 70.87 in / 1800 mm |
| Min. Lifting Height | 4.25–4.33 in / 110 mm |
| Overall Height | 143.7–144 in / 3650 mm |
| Drive-Thru Clearance | 94 in |
| Motor Power | 4.0 HP |
| Power Requirements | 220V / 60Hz / 1PH |
| Locking Positions | 12 |
| Product Weight | 1,369 lbs |
*Note: Concrete thickness must be at least 5.9” (150 mm) with a 3000 PSI rating. Failure to install this lift on the proper concrete, could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation.
Downloads
Videos Hide Videos Show Videos
Warranty Policy
We offer a limited one-year (12 months) warranty on all parts and against all product defects, free of charge to our customers, on all equipment.
A 2-year extended warranty plan may be purchased for any piece of Katool or M&E automotive equipment (Contact us for more info)
* Including but not limited to: Cylinders, power units, motors, displays, electronics, etc...
Vehicle lifts will include an additional three-year (36 months) warranty on all lift structural components only.
Warranty claim for all products must fall within above period in order to qualify for limited warranty. Warranty is non-transferable, must have original order number, and purchased from our company or a registered vendor. Replacement Parts will be provided at no cost to the customer and will include free shipping.
*All warranty claims submitted to KATOOL are subject to approval by the warranty/service department and may be approved or denied at the full discretion of these departments. Photos and/or videos of original defects may be requested. Customers should not disassemble any piece of equipment before proof of original problem/issue has been determined. Any equipment outside of the policy will not be covered and buyer will be responsible for purchasing replacement parts at full cost and shipping charges will apply. Labor is not included in warranty.
- Free Shipping:
- Yes
- Capacity:
- 12,000 Lbs
CALL US NOW
