Katool KT-4H150 15,000 lbs 4 Post Alignment Lift
The Katool KT-4H150 Heavy Duty 4-Post Alignment Lift is a professional-grade vehicle lift engineered for automotive shops, heavy-duty service facilities, and serious home garages requiring high capacity, safety, and versatility. Designed to handle trucks, vans, SUVs, and heavy work vehicles with ease, this lift combines rugged construction with advanced safety features and flexible installation options. Built to support demanding workloads and reliable daily use, the KT-4H150 enhances your workflow for alignment, maintenance, storage, and undercar service jobs.
Features
- High Lifting Capacity - Capable of lifting up to 15,000 lbs (≈ 6,803 kg), the KT-4H150 accommodates a wide range of vehicles from heavy trucks to commercial vans.
- CE Certified Safety - Engineered and tested to 115 % dynamic load and 150 % static load standards, this lift meets rigorous safety performance requirements.
- Reliable Safety Locking System - Equipped with mechanical safety locks on all four posts, including primary and secondary locking mechanisms, and a single-point manual safety lock release for secure positioning and controlled descent.
- Rolling Jack Included - Includes a 6,000 lb rolling jack for additional undercarriage access and wheel service without removing the vehicle from the lift.
- Flexible Installation - The power-side column can be installed on either side, front, or rear to optimize shop layout and workflow.
- Non-Skid Platforms - Diamond-plate runways provide secure traction during vehicle approach and lifting operations.
- Turntable-Ready - Compatible with optional alignment turntables for full wheel alignment capabilities (Sold separately).
Specifications
| Model | KT-4H150 |
| Lifting Capacity | 15,000 lbs (≈ 6,803 kg) |
| Overall Width | 136" / 3454 mm |
| Overall Length | 208" / 5283 mm |
| Overall Length (with ramps) | 245" / 6223 mm |
| Height of Posts | 86" / 2184 mm |
| Min.Runway Height | 9" / 228.6 mm |
| A/lax.Rise | 75" / 1905 mm |
| Width Between Posts (inner) | 118" / 2997 mm |
| Width Between Runways inner | 43" / 1092 mm |
| Locking Positions | 12 |
| Lock Spacing | 4,7" / 1193.8 mm |
| Lifting Time Under Load | 95 sec (55 sec down) |
| Motor | 220 V / 4Hp |
| Shipping Weight | 4,450 Lbs (2018 Kg) |
*Note: Concrete thickness must be at least 3.93” (100 mm) with a 3000 PSI rating. Failure to install this lift on the proper concrete could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation.
Warranty Policy
We offer a limited one-year (12 months) warranty on all parts and against all product defects, free of charge to our customers, on all equipment.
A 2-year extended warranty plan may be purchased for any piece of Katool or M&E automotive equipment (Contact us for more info)
* Including but not limited to: Cylinders, power units, motors, displays, electronics, etc...
Vehicle lifts will include an additional three-year (36 months) warranty on all lift structural components only.
Warranty claim for all products must fall within above period in order to qualify for limited warranty. Warranty is non-transferable, must have original order number, and purchased from our company or a registered vendor. Replacement Parts will be provided at no cost to the customer and will include free shipping.
*All warranty claims submitted to KATOOL are subject to approval by the warranty/service department and may be approved or denied at the full discretion of these departments. Photos and/or videos of original defects may be requested. Customers should not disassemble any piece of equipment before proof of original problem/issue has been determined. Any equipment outside of the policy will not be covered and buyer will be responsible for purchasing replacement parts at full cost and shipping charges will apply. Labor is not included in warranty.
- Free Shipping:
- Yes
CALL US NOW
