JET Tools JTM-1254VS W/ACU-RITE 203 3X (Q) DRO, X Powerfeed & Air Power Drawbar
The JET JTM-1254VS combines durability, strength, and precision engineering, resulting in a 12” x 54” Variable Speed Vertical Milling Machine that produces high-quality components. Designed for ease of use, the Jet Mill features ongoing automatic lubrication every 180 minutes, a quick-nut spindle feed, and Certified Meehanite castings. These features provide the end-user with a simpler solution for leveling the machine without needing to raise it off the floor.
Features
- Certified Meehanite Castings.
- Precision bored and honed milling head.
- High precision Class 7 spindle bearings.
- Quick Spindle Feed Nut.
- Three-stage power downfeed with automatic stop.
- Heavy-duty spindle brake.
- Precision hardened and ground ways and table.
- Three Precision ground t-slots.
- Turcite B on X & Y Axis.
- Adjustable gibs throughout.
- CSA/CUS: Following strict guidelines and electrical requirements, these JET Mills are CSA/CUS certified.
- Spindle Guard.
- Spindle Brake for rapid stopping of the spindle.
- Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance.
- Quick nut for spindle feed.
- JET exclusive new casting provides the end-user an easier solution to leveling the machine without raising it up off the floor.
- Two 115V outlets on electrical box for Powerfeeds only.
- Spindle Safety Guard.
- Led Machine Lamp.
- Dual Locks on All Moveable Surfaces.
- Chip Pan.
- Draw bar.
Specifications
| Model Number | JTM-1254VS |
| Collet Capacity | 1/8 - 1 |
| Column Width (In.) | 14-1/4 |
| Distance Spindle to Column (Max.) (In.) | 27-3/4 |
| Max Distance Spindle to Table (In.) | 23 |
| Motor (HP) | 5HP, 230/460V, 3Ph |
| Number of Axis | 3 (Quill) |
| Overall Dimensions (L x W x H) (In.) | 92-1/8 x 79-7/8 x 104-1/4 |
| Power Draw Bar | Pneumatic |
| Powerfeed | X-Axis |
| Quill Diameter (In.) | 4-1/8 |
| Quill Down Feed Rates (IPR) | .0015–.003–.008 |
| Range of Spindle Speeds (RPM) | 80 - 3,800 |
| Saddle Width (In.) | 25-5/8 |
| Spindle Taper (In. x TPI) | NST #40 |
| Spindle Travel (In.) | 5 |
| Style (Type) | Variable Speed NT40 |
| T-Slot Centers (In.) | 2-1/2 |
| Table Cross Travel (In.) | 15-1/3 |
| Table Longitudinal Travel (In.) | 33-7/8 |
| Table Longitudinal Travel With Powerfeed (In.) | 28-1/4 |
| Table Size (L x W) (In.) | 12 x 54 |
| Travel of Knee (In.) | 19-1/4 |
| Travel of Ram (In.) | 25 |
| Weight (Lbs.) | 3969 |
| Work Table Weight Capacity (Lbs.) | 925 |
WARNING: Cancer and Reproductive Harm
WARRANTY INFORMATION
JET RED ASSURANCE 2-YEAR WARRANTY
JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET Tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
JET RED ASSURANCE 2-YEAR WARRANTY
JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET Tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
