G-TEC TTCF-9A HD flusher with variable speed flow rate
The Flo-Dynamics TTCF-9A Variable High Flow Hydraulic System Flusher will flush and clean transmission coolers and lines or any hydraulic system of contamination, sludge, varnish deposits, and particles from a failed transmission. The TTCF-9A, with an adjustable flow rate from 1-8 GPM, was specially developed for heavy duty transmission cooling systems requiring high flow rates. Using the same hydraulic fluid as the hydraulic system being flushed and cleaned, a user can select from multiple flush cycles ranging from 15-120 minutes, and verify system cleanliness by checking the reusable 60 micron cleanable filter screen. Using the heating circulation mode, heating to a preset 140°F in 45 minutes is fast and easy. Two auto-selected GPM-dependent flush patterns designed to inject the optimal amount of air creating an agitating scrubbing action to remove trapped debris and solidified waxy varnish. Easily switch flow direction without removing service hoses during and between flush cycles with the reverser valve. From the conveniently located control panel, the user can observe system flow, pressure, temperature, total hours run, filter timer, and easily select pump on/off, heater on/off, flush cycles, and manual air purge.
Features
- Powerful 3/4 HP motor.
- Requires a dedicated 20-amp or two separate 15-amp circuits.
- 13’ heavy duty 3/4” service hoses.
- 10 gallon transmission fluid capacity with easy to read level sight glass.
- Adjustable flow rate of 1-8 GPM, specially developed for every type of vehicle, from automobiles to heavy duty transmission cooling systems requiring a higher flow rate.
- Low fluid sensor shuts off heater and pump.
- 60 micron cleanable screen filter with “T” handle simplifies verification of cleanliness.
- Reverser valve allows easy flow reversal without removing service hoses.
- Two auto-selected GPM-dependent flush patterns designed to specifically inject the optimal amount of air creating an agitating scrubbing action to remove trapped debris and solidified waxy varnish.
- Selectable flush times; choose from continuous or 15-120 minutes, with or without air injection.
- Auto stop and alert at flush cycle end with flush cycle results displayed.
- Air purge allows for easy fluid removal from system and service hoses.
- Spin-on filter timer displays hours used.
- Two non-bypass spin-on magnetic replaceable system filters (P/N 40300272).
Specifications
| Model | TTCF-9A |
| Dimensions | 34.125” L x 22.5” W x 38.875” H |
| Weight | 215 lb. |
| Power | 20A 110V AC |
Downloads
FLO-DYNAMICS LIMITED ONE (1) YEAR WARRANTY
Flo-Dynamics warrants only to the original Purchaser that under normal use, care and service, the Equipment (except as otherwise provided herein) shall be free from defects in material and workmanship for one year from the date of original invoice. External hoses, remote control modules, adapters and all other attachments, supplies and consumables (except as otherwise provided herein) are warranted for 90 calendar days from the date of original invoice. Filter elements are not warranted. Printed circuit boards purchased from, but not installed by Seller are not warranted.
SELLER’S OBLIGATIONS UNDER THIS WARRANTY ARE LIMITED SOLELY TO THE REPAIR OR, AT SELLER’S OPTION, REPLACEMENT OF EQUIPMENT OR PARTS WHICH TO SELLER’S SATISFACTION ARE DETERMINED TO BE DEFECTIVE AND WHICH ARE NECESSARY, IN SELLER’S JUDGEMENT, TO RETURN THE EQUIPMENT TO GOOD OPERATING CONDITION. NO OTHER WARRANTIES EXPRESS OR IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AND ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED.
This warranty does not cover (and separate charges for parts, labor and related expenses shall apply to) any damage to, malfunctioning, inoperability or improper operation of the Equipment caused by, resulting from or attributable to (A) abuse, misuse or tampering; (B) alteration, modification or adjustment of the Equipment by anyone other than Seller’s authorized representatives; (D) improper or negligent use, application, operation, care, cleaning, storage or handling; (E) fire, water, wind, lightning or other natural causes; (F) adverse environmental conditions, including, without limitation, excessive heat, moisture, corrosive elements, or dust or other air contaminants, radio frequency interference, electric power failure, power line voltages beyond those specified for the equipment, unusual physical, electrical or electromagnetic stress, and/or any other condition outside of Seller’s environmental specifications; (G) use of the Equipment in combination or connection with other equipment, attachments, supplies or consumables not manufactured or supplied by Seller; or (H) failure to comply with any applicable federal, state or local regulation.
Repairs or replacements qualifying under this Warranty will be performed on regular business days during Seller’s normal working hours within a reasonable time following Purchaser’s request. All requests for Warranty service must be made during the stated Warranty period. This warranty is non-transferable.
CALL US NOW
