G-TEC TTCF-7AR Heated Cooler Line Flusher
Why use a Heated Flusher? A heated flusher cleans out the cooler lines, heat exchanger as well as other components prior to installing a rebuilt or new transmission—a process which has been proven to minimize the likelihood of repeat repairs.
G-TEC Heated Flushers quickly and easily remove contamination by melting waxy varnish residue from burnt ATF and purging the particles and contaminants from the system.
Features
- 10 Gallon all-steel tank.
- Immersion heater.
- 1750 RPM commercial-grade pump motor with 1/3 HP service factor.
- Spin-on filters.
- Domestic adapters.
- Flow meter.
- Tool tray.
- Fluid purge valve.
- Air purge system.
- Vent tower.
- Pump/motor shroud with hose holders.
- Manual reverse valve.
- Domestic adapters.
- Banjo adapters.
- Honda adapters.
Specifications
| Model | TTCF-7AR |
| Dimensions | 30.75” L x 16.5” W x 33.5” H |
| Weight | 130 lb. |
| Power | 20A 110V AC |
Downloads
FLO-DYNAMICS LIMITED ONE (1) YEAR WARRANTY
Flo-Dynamics warrants only to the original Purchaser that under normal use, care and service, the Equipment (except as otherwise provided herein) shall be free from defects in material and workmanship for one year from the date of original invoice. External hoses, remote control modules, adapters and all other attachments, supplies and consumables (except as otherwise provided herein) are warranted for 90 calendar days from the date of original invoice. Filter elements are not warranted. Printed circuit boards purchased from, but not installed by Seller are not warranted.
SELLER’S OBLIGATIONS UNDER THIS WARRANTY ARE LIMITED SOLELY TO THE REPAIR OR, AT SELLER’S OPTION, REPLACEMENT OF EQUIPMENT OR PARTS WHICH TO SELLER’S SATISFACTION ARE DETERMINED TO BE DEFECTIVE AND WHICH ARE NECESSARY, IN SELLER’S JUDGEMENT, TO RETURN THE EQUIPMENT TO GOOD OPERATING CONDITION. NO OTHER WARRANTIES EXPRESS OR IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AND ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED.
This warranty does not cover (and separate charges for parts, labor and related expenses shall apply to) any damage to, malfunctioning, inoperability or improper operation of the Equipment caused by, resulting from or attributable to (A) abuse, misuse or tampering; (B) alteration, modification or adjustment of the Equipment by anyone other than Seller’s authorized representatives; (D) improper or negligent use, application, operation, care, cleaning, storage or handling; (E) fire, water, wind, lightning or other natural causes; (F) adverse environmental conditions, including, without limitation, excessive heat, moisture, corrosive elements, or dust or other air contaminants, radio frequency interference, electric power failure, power line voltages beyond those specified for the equipment, unusual physical, electrical or electromagnetic stress, and/or any other condition outside of Seller’s environmental specifications; (G) use of the Equipment in combination or connection with other equipment, attachments, supplies or consumables not manufactured or supplied by Seller; or (H) failure to comply with any applicable federal, state or local regulation.
Repairs or replacements qualifying under this Warranty will be performed on regular business days during Seller’s normal working hours within a reasonable time following Purchaser’s request. All requests for Warranty service must be made during the stated Warranty period. This warranty is non-transferable.