G-TEC Transmission Pressure Gauge Fitting D
Fittings to adapt pressure gauges and dyno pressure lines to both import and domestic transmission case pressure ports
For Import and Domestic Oil Pressure Ports
These brass and steel fittings are hard to find and cover most applications from 604’s to Toyotas. They will allow you to adapt your pressure gauge or transmission dyno pressure lines to both import and domestic transmission case pressure ports.
*The makes/models listed are a guideline to help determine which fitting to use. The fitting needed may be affected by the transmission’s country of manufacture or other factors.
Fitting D: All models of Mercedes Suzuki and Volvo; the AM series of Mitsubishi; the Toyota models of GM and Lexus; and all other models of Toyota not listed on any other fitting (This model)
Other Models of Fittings: (*Sold separately)
- Complete Kit: Transmission pressure Gauge fitting kit
- Fitting A: All early models of Acura/Honda and KM Series of Chrysler Hyundai and Mitsubishi
- Fitting B: VW/Audi models of Porsche; A-20 A-30 models of Toyota; and 010-003 models of VW/Audi
- Fitting C: F34 models of Chrysler; all Mazda models of Ford; Jatco models of GM Infiniti and Mitsubishi; and all models of Nissan/Datsun and Subaru
- Fitting E: All models of Isuzu and the Mercedes models of Porsche
- Fitting F: The A series models of FWD Chryslers
- Fitting F-1: The A series of models of RWD Chryslers
- Fitting F-2: All late model FWD Chryslers
- Fitting G: All ZF models of BMW Chrysler AMC Jaguar Peugeot Saab VW/Audi and Volvo
- Fitting H: All late models of Honda specifically top mount
- Fitting X: BW 65 models of BMW & Jaguar; BW 37 models of Saab; TH 400 models of Jaguar; BW models of Volvo; & all USA-built models of Ford & GM
- Fitting X-1: All RWD Chryslers; USA-built models of AMC; and 1996-1998 models and TH 400 models of Jeep
- Support Adapter 1: 3/8 mpt x 1/4 fpt Brass Hex Bushing
- Support Adapter 2: 1/4 fpt x 1/8 mpt Brass Hex Bushing
- Support Adapter 3: 1/4 mpt close Nipple All Thread
- Support Adapter 4: 1/8 mpt close Nipple All Thread
Specifications
| Weight | 0.5 lbs |
| Machines | PROMAX40, TS-410, TS-735, TSD-450, TSD-650, TSD-735, TSDPS-735, TSPS-735 |
FLO-DYNAMICS LIMITED ONE (1) YEAR WARRANTY
Flo-Dynamics warrants only to the original Purchaser that under normal use, care and service, the Equipment (except as otherwise provided herein) shall be free from defects in material and workmanship for one year from the date of original invoice. External hoses, remote control modules, adapters and all other attachments, supplies and consumables (except as otherwise provided herein) are warranted for 90 calendar days from the date of original invoice. Filter elements are not warranted. Printed circuit boards purchased from, but not installed by Seller are not warranted.
SELLER’S OBLIGATIONS UNDER THIS WARRANTY ARE LIMITED SOLELY TO THE REPAIR OR, AT SELLER’S OPTION, REPLACEMENT OF EQUIPMENT OR PARTS WHICH TO SELLER’S SATISFACTION ARE DETERMINED TO BE DEFECTIVE AND WHICH ARE NECESSARY, IN SELLER’S JUDGEMENT, TO RETURN THE EQUIPMENT TO GOOD OPERATING CONDITION. NO OTHER WARRANTIES EXPRESS OR IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AND ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED.
This warranty does not cover (and separate charges for parts, labor and related expenses shall apply to) any damage to, malfunctioning, inoperability or improper operation of the Equipment caused by, resulting from or attributable to (A) abuse, misuse or tampering; (B) alteration, modification or adjustment of the Equipment by anyone other than Seller’s authorized representatives; (D) improper or negligent use, application, operation, care, cleaning, storage or handling; (E) fire, water, wind, lightning or other natural causes; (F) adverse environmental conditions, including, without limitation, excessive heat, moisture, corrosive elements, or dust or other air contaminants, radio frequency interference, electric power failure, power line voltages beyond those specified for the equipment, unusual physical, electrical or electromagnetic stress, and/or any other condition outside of Seller’s environmental specifications; (G) use of the Equipment in combination or connection with other equipment, attachments, supplies or consumables not manufactured or supplied by Seller; or (H) failure to comply with any applicable federal, state or local regulation.
Repairs or replacements qualifying under this Warranty will be performed on regular business days during Seller’s normal working hours within a reasonable time following Purchaser’s request. All requests for Warranty service must be made during the stated Warranty period. This warranty is non-transferable.
CALL US NOW
