EMAX Premium 10 HP 1 PH 80 Gallon Vertical With Air Silencer-With Pressure Lube Pump

Silent Air Quiet Air Compressor

Engineered and manufactured in the U.S.A. The whisper series compressors reduce stationary compressor DBA ratings by as much as 25%!.

The Whisper dissipates compressor intake noise by channeling the intake air through a series of baffle plates and pre-filter media within the silencer cabinet. As a result, the piston intake noise is trapped and dissipated within the silencer structure. As a result, the piston intake noise is trapped and dissipated within the silencer structure. It also acts as a secondary filtration for cleaner air.

Patented Pressure Lubricated 2-stage cast iron pump with dual control design allows for automatic or continuous run rated at up to 70,000 hours based on B-10 bearing life rating.

Features

• Pumps are SUPER quiet in operation and built to last!.
• Solid cast iron crankcase.
• Precision balanced solid cast iron crankshaft.
• Timken-Style stainless steel roller bearings on the front and rear of the crankshaft.
• Removable 100% cast iron cylinders.
• Re-usable oil filter.
• Oil Pressure Gauge.
• Built-in fan, head unloaders, inter-cooler and after-coolers.
• One of the lowest RPM compressor pumps on the market. That’s the Emax difference!.
• Not only do you get the big CFM output, but the lower RPM operation also reduces friction and heat buildup to extend pump life!.
• Raised pump platform design is a nice feature for keeping your oil cool within the pump.
• Large 1-3/8” output shaft.
• High quality ball bearings on the front and rear of the motor shaft.
• Large starting and running capacitors.
• 15 Service Factor load. This means the motor can be pulled 15% over full load for more break horsepower.
• Dynamically balanced armature for low vibration levels.
• Automatic Belt Tensioner will allow you to adjust the tension and alignment of your belts with ease and in just minutes.
• Belt guards built right here in the USA with 13 G steel and premium grade expanded metal.
• For your safety, our belt guards are OSHA approved.
• Our air tanks are manufactured right here in the USA and are ASME code compliant in 50 states including California.
• 100% brass check valves with Teflon Seating.
• 100% brass ASME safety valves.
• Automatic Tank Drain with Integrated Dual Timer will do maintenance for you automatically on the time intervals you set to ensure that the condensation is removed.
• Prewired magnetic starter.
• “Continuous run” feature that maximizes performance and reduces wear on the internal components of your motor.
• For normal workloads in your shop, you can turn off the continuous run and the unit will go back to automatic start/stop operation.
• Taper lock style 2-groove pulleys (not single groove).
• We also use dual 2-groove, B-Style belts to drive our pumps.