Stratus SAE-UT9000 Commercial Grade On-Ground or In-Ground Mount Low Profile Full Rise Scissor Lift
Limited Access Zones
Features
- Commercial grade open center design.
- Low profile, minimum height is 4 5/16".
- On-Ground surface mount or In-ground flush mount (see detailed foundation plan).
- Pneumatic safety lock release.
- Durable cylinders with anti-surge valves.
- Aluminum motor power unit.
- 14 lock position.
- 24V low voltage control system.
- Platforms can be extended for long vehicles.
- Self-lubricated bushing and bearing.
- Proofed by dynamic test with 120% of rated capacity and static test with 150% rated capacity.
- Powder coating finish: Granite Gray (RAL 7026) + Rein orange (RAL 2004).
Technical Specification
| Model | UT9000 |
| Capacity | 9,000 LBS |
| Lifting Time | ~60SEC |
| Max Height | 77 9/16” (1970 MM) |
| Min Height | 4 5/16” (110 MM) |
| Runway Length without Ramps | 58 1/16” (1475 MM) |
| Runway Length with Ramps | 82 11/16” (2100 MM) |
| Overall Width | 82 5/8” (2100 MM) |
| Runway Width | 25 9/16” (650 MM) |
| Between Runway | 31 1/2” (800 MM) |
| Motor | 4 HP, 220V, 60 HZ, 1ph |
| Oil | AW32 or AW46 |
| Breaker | 30A |
| Platform Weight | 1,962 LBS |
| Platform Dimension | 84” L * 31” W * 17” H |
| Control Panel Weight | 172 LBS |
| Control Panel Dimension | 43” L * 22” W * 25” H |
Technical requirements
- Workstation not less than 157 1/2 * 275 9/16.
- The thickness of the concrete foundation is not less than 8 Inch. The plane inclination of the foundation is not more than 1/5, and the compression resistance of the foundation is not less than 19.6MPa.
- Reserved power cord specification should not be lower than RVV4x1/16, the length from the exit should not be less than 40
- After installation, the 4 3/4 wide slot is covered with a cover plate.
*Important Notes
1. A $250 surcharge apply to shipping in the following states: OR, WA, ID, MT, ND, SD, ME.
2. The buyer is always responsible for unloading the product from the truck, a forklift or similar equipment is required for unloading.
3. Discounts provided for pickups in College Station, Texas Warehouse.
Downloads
Warranty Information
- 5 years lifting structure, 3 years hydraulic, and 2 years electrical.
- Note: Parts only and labor costs for someone to install the replacement part are NOT covered. The hydraulic cylinders come with a 30-day full warranty and after 30 days we will provide a seal kit.
