Bendpak BP-5175306 Two Post Lift 10,000 lb. Capacity 10APX
10,000‐lb. Capacity / Adaptable Clearfloor / Adjustable Width / Screw Pads / HIGH-RISE
The next generation of two-post lifts - now with an increased height! The 10AP Series is built with the future in mind, and has all the features you'll need to service vehicles as effectively as possible. This revolutionary lift can handle Electric Vehicles effortlessly and can adapt to both symmetrical and asymmetrical configurations.
Features
- Durable powder coat finish.
- Expandable top beam accommodates wide or narrow drive-thru configurations.
- Double-telescoping screw pads offer increased versatility.
- Padded overhead safety shutoff bar.
- Exclusive Bi-Metric arm design for more versatile arm positioning.
- Single-point safety release.
- Drop-end arms provide a lower pad height.
- Dual hydraulic direct-drive cylinders.
- Oversized 53" & 59" tall carriages for superior strength and durability.
- Electric / hydraulic HVLP power system.
- Self-lubricating dura-glide UHMW polyethylene bearing system.
- Safety locks in each column spaced every 3".
- Automatic arm restraints withstand over 2000-pounds of side force.
- Heavy-duty 1/2" aircraft-quality equalizer cables.
- Oversized cable sheave diameter reduces cable fatigue.
- 14-piece standard adapter set.
- Four triple-telescoping arms.
- ALI certified.
Specifications
Model | 10APX |
Lifting capacity | 10,000 lbs. / 4,536 kg |
Max. Capacity | 5,000 / 2,268 kg (Front Axle) 5,000 / 2,268 kg (Rear Axle) |
A – Max. Rise | 75.5 in. / 1,918 mm |
B – Lifting Height(1) | 79.5 in. / 2,007 mm |
C – Max. Lifting Height(1) | 89 in. / 2,261 mm |
D – Min. Height(1) | 4 in. / 102 mm |
E – Overall Height | 157 in. / 3,988 mm |
F – Overall Width | 135 in. / 3,431 mm (Narrow) 145 in. / 3,683 mm (Wide) |
G – Outside Columns | 127.5 in. / 3,238 mm (Narrow) 137.5 in. / 3,492 mm (Wide) |
H – Inside Posts | 108.5 in. / 2,756 mm (Narrow) 118.5 in. / 3,010 mm (Wide) |
I – Drive-Thru | 92 in. / 2,477 mm (Narrow) 102 in. / 2,731 mm (Wide) |
J – Floor to Top Switch | 151.5 in. / 3,850 mm |
K – Front Arm Reach | 24.5 in. / 622 mm (min) 50 in. / 1,270 mm (max) |
L – Rear Arm Reach | 32 in. / 812 mm (min) 59.25 in. / 1,504 mm (max) |
Max. load per Lift Arm | 2,500 lbs. / 1,134 kg |
Screw Pad Adjustment | 2 in. / 51 mm |
Time to Full Rise(3) | ≈ 45 seconds |
Motor(2) | 220 VAC, 60 Hz, 1 Phase |
Sound | <70 dB |
(1) Lifting Height is maximum lifting height of lift with contact pads adjusted to low setting and no adapter(s). Maximum Lifting Height is maximum lifting height of lift with contact pads adjusted to high setting and with both tall and medium adapters installed (Sold Separately). (2) Special voltages available upon request. (3) Actual rise and descent times vary depending on vehicle weight. Specifications subject to change without notice.