BendPak / 10 HP / 120-Gal. Vert. Tank / 208-230V, 60 HZ 3-Ph. V-Max Elite Air Compressor
VMX-10120V-603 V-Max Elite Air Compressor / 10 HP / 120-Gallon Vertical Tank / 208-230V, 60 HZ 3-Phase
Meet the enormous BendPak V-Max Elite 10120V-603 3-phase air compressor system. When it comes to pure air power and reliability, there's no such thing as a more solid investment.
This V-Max Elite air compressor is a top-of-the-line air delivery system designed for maximum efficiency under every load condition. Like others in the V-Max Elite series of air compressors, the 10120V-603 features an extreme-duty, four-cylinder pump made of 100% cast iron. These rugged two-stage lubricated reciprocating compressors are made to shine on even your busiest days, including everything from automotive and body repair to manufacturing and industrial applications.
Features
- 10 HP energy-efficient motor.
- Extra-quiet, low-RPM pump.
- Cast-iron V-Max Elite pump features simple splash lubrication for total reliability and a "V-4" finned cylinder configuration that provides 360° cooling.
- Proven air-cooled design is economical, reliable and environmentally friendly.
- Two compression rings and one oil control ring provide excellent oil control and high efficiency air delivery.
- Dual drive belts require less belt tension resulting in less load on pump bearings, longer belt life and low vibration.
- Fully-enclosed belt guard.
- Cast-iron pump and heads are more stable under heavy workloads and do not warp from heat like aluminum cylinders with a pressed-in sleeves do.
- ASME rated tank.
- Anti-vibration pads.
- Large surface area and cooling fins on cylinders and forced-air after-cooler provides efficient heat dissipation for lower operating temperatures and dryer air. Compressor runs cooler, oil life is extended and maintenance is reduced.
- Tapered roller main bearings provide full contact and support of the crankshaft and needle-type piston pin bearings properly distribute bearing loads.
- Precision balanced flywheel has forced-air fan blades for optimum compressor cooling and life.
- Magnetic starter provides thermal overload protection and minimizes start loads providing long life and trouble‐free operation.
- ASME rated safety valve protects the compressor from overpressure and safeguards the operator.
- Balanced flywheel and counterbalanced crankshaft results in nearly vibration-free operation.
- Readily accessible disc-valves do not require disassembly of compressor piping, for easy accessibility and reduced maintenance cost and downtime.
- Corrosion resistant tubing for coolers, separators and valves for longer life and reduced maintenance.
- Oversized ductile iron crankshaft provides extra strength and longer wear.
- High-density, die-cast aluminum alloy rods minimize reciprocating weight.
- Rugged cast iron oil reservoir has convenient sight gauge glass, large oil drain and convenient fill cap.
- Automatic pressure switch provides auto start and stop.
- Integrated pressure unloader valves are built into the intake valve assembly on the compressor head, reducing internal pump heat from initial start-up compression.
- Pressure gauge with service valve.
- Oversize replaceable air filters.
Specifications
Motor | |
Horsepower | 10 HP |
RPM | 1,740 RPM |
Voltage | 208-230/460VAC |
Phase | 3 Ph |
Hertz | 60 Hz |
Amp Draw | 36-30A @ 208/230V - 16A @ 460V |
Recommended Breaker | 40A @ 208/230 - 25A @ 460V |
Noise | 75 dB |
Pump | |
Style | Two-Stage / V-4 |
Pump RPM | 745 RPM |
Material | 100% Cast Iron |
Duty Cycle | Continuous |
CFM | 41 CFM |
CFM Rated @ | 35 CFM |
Max PSI | 175 PSI |
Tank | |
Orientation | Vertical |
Size | 120 gallon |
Outlet | 1/2" Fitting |
Certification | ASME |
Dimensions | |
Width | 44" (1118 mm) |
Depth | 79" (2007 mm) |
Height | 30" (762 mm) |
Shipping | |
Weight | 1,002 lbs. (454 kg) |
Dimensions | 49" x 40" x 83" (1,257 mm x 1,016 mm x 2,108 mm) |
Downloads