Baileigh AFS-2400 3/4hp 110V 1Ph Air Filtration System w/ Remote 3-Stage, 1 Micron 2400CFM
*Images for reference only.
Built for commercial and industrial shops, the AFS-2400 Air Filtration System will give you years of reliable service. It features three speeds, and a heavy-duty 3/4 HP motor produces a maximum 2450 cfm unrestricted airflow and provides 2132 cfm of filtered air. This will clean the air in a 55’x 55’ shop every 10 minutes. The AFS-2400 air filtration system will remove 99-percent of dust particles as small as five microns and 91-percent of particles as small as one micron in size. And the best part of this industrial air filter is that it is 110 volt and only takes 13.5 amps of power to run.
Features
- Comes standard with a radio frequency (RF) remote control allows you to operate the Air-Tech HP from anywhere in the shop, even from an adjacent room
- The convenient RF remote is equipped with three speeds and a timer function that allows you to set a timer for 2-, 4-, 6-, and 8-hour increments
Specifications
| Model Number | AFS-2400 |
| Motor Amps | 13.5 |
| Motor Power (HP) | 3/4 |
| Motor Voltage (V.) | 110 volt |
| Speeds (CFM) | 2450-2132 |
*Specifications subject to change without notice.
Downloads
*Baileigh collects Sales Tax on all orders shipped to California and Wisconsin
Warranty Information
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791
