Description
APEX Tire Saver Ramp Kit (Set of 4)
Lightweight Foam Tire-Saver Ramp Kit from APEX is built to keep your tires round, healthy, and off cold concrete during storage. Each ramp is part of a modular three piece system with a gentle drive-on section that leads into a wide, contoured cradle with roughly 1.6 inches of lift, supporting the tire’s natural shape instead of flattening it against the floor. You get a full set of four lightweight ramps so every wheel is protected. Roll on, park, and know your performance car, classic, truck, or SUV will sit cleaner and come off storage with tires ready to drive.
Features & Benefits
- Modular three piece design per wheel, with approach sections that lock into a wide, contoured cradle to support the tire's natural shape instead of flattening it into cold concrete.
- Provides roughly 1.6 inches of lift to help reduce flat spotting and add a little working room, while keeping the car easy to access in the garage.
- Built in ramp sections let performance cars and many low vehicles roll on without jacking or stacking boards.
- Solid, lightweight structural foam core supports typical passenger vehicle loads without crushing under normal storage conditions.
- Textured outer coating grips concrete and coated floors, resists spills and scuffs, and is easy to clean.
- Set of four tire cradles so every wheel is protected, not just the driven axle.
- Non marring construction that is gentle on finished floors and will not rust, stain, or absorb water.
- Each ramp module is light enough to move with one hand, stacks neatly, and fits easily on standard shelving.
What's Included
- Four (4) APEX Tire Saver cradle ramps with matching modular drive on ramp sections
- Textured, non marring protective polyurea coating on each ramp component
- Setup, configuration, and storage guidelines for long term use
Specifications
| Load capacity per cradle | 1,750 lb (approx. 794 kg) |
| Load capacity per set of 4 | 3,500 lb (approx. 1,588 kg) |
| Individual set weight (3 pcs) | 7 lb (approx. 3 kg) |
| Tire Diameter | 24-37 in (610-940 mm) |
| Ramp length | 24 in (610 mm) |
| Height | 1.5 in (38 mm) |
| Approach angle | 9 degrees |
| Core material | High density expanded polystyrene (EPS) structural foam |
| Coating material | Textured polyurea elastomer |
| Intended use | Tire protection and flat-spot reduction during storage |
| Recommended surfaces | Concrete, sealed, or coated garage floors |
| Shipping weight | 32 lb (approx. 14.5 kg) |
WARNING: California Prop 65
Warranty Information
Click here to download general warranty- Free Shipping:
- Yes
Reviews
CALL US NOW
