Description
APEX 96 Inches Lightweight Foam 4-Post Ramp Kit (Set of 2)
The 96" Lightweight Foam 4-Post Ramp Kit from APEX is the ultra light, hook nose upgrade made specifically for BendPak HD-973P and HD-973PX lifts. Each 96 inch ramp delivers 11 inches of lift with a shallow 6 degree approach angle that low cars can actually climb without bumper drama. Built from high density structural foam with a rugged textured coating and a reinforced hook nose, these ramps are engineered to drop into the HD-973P / HD-973PX ramp pockets as a direct replacement for the factory steel ramps. Once you switch to APEX, you will not want to wrestle stock ramps again.
Features & Benefits
- Dramatically lighter than the factory steel ramps supplied with BendPak HD-973P and HD-973PX lifts, while still providing serious strength.
- Engineered specifically for BendPak HD-973P and HD-973PX four-post lifts and not designed or approved for use with other lift models or brands.
- 96 inch length, 11 inch lift, and 6 degree approach angle help protect splitters, lips, and front overhangs when driving onto the lift.
- Internal hook reinforcement ties deep into the foam core for a strong, secure fit in the lift slot that will not rely on glue alone.
- Solid, closed cell EPS supports thousands of pounds while staying easy to carry, and will not rust, absorb water, or transfer heat.
- Chemically bonded outer shell resists abrasion and chemicals and provides a grippy surface for both tires and shop floors.
- Molded hand grips and balanced weight make the ramps simple for one person to move, hang, and store.
- Foam and coating combination is safe on concrete, epoxy, and most painted or sealed surfaces without scratching or gouging.
What's Included
- One pair (2 total) of 96" Lightweight Foam 4-Post Lift Ramps with reinforced hook nose interfaces
- Integrated molded carry zones on each ramp for easy handling and storage
- Installation, compatibility, and safety guidelines
Specifications
| Load capacity per ramp | 1,750 lb (approx. 794 kg) |
| Load capacity per pair | 3,500 lb (approx. 1,588 kg) |
| Individual item weight (ea) | 13.5 lb (approx. 6 kg) |
| A - Length | 96 in (2,438 mm) |
| B - Width | 19 in (483 mm) |
| C - Height | 11 in (279 mm) |
| D - Hook Nose (W x H) | 14 in x 3.25 in (356 mm x 83 mm) |
| E - Approach angle | 6 degrees |
| Hook style | Reinforced hook nose for drop-in four-post lift ramp pockets |
| Core material | High density expanded polystyrene (EPS) structural foam |
| Coating material | Set of 2 hook nose four post lift ramps |
| Configuration | Drive-on ramps for four-post vehicle lifts |
| Intended use | BendPak HD-973P and HD-973PX four-post parking lifts only |
| Shipping weight | 33 lb (approx. 15 kg) |
Downloads
WARNING: California Prop 65
Videos
Warranty Information
- Free Shipping:
- Yes
Reviews
CALL US NOW
