Description
APEX 48 Inches Lightweight Foam Trailer Ramp Kit (Set of 2)
The 48" Lightweight Foam Trailer Ramp Kit from APEX is built for low cars that need extra clearance and a bit more lift. Each 48 inch ramp raises the trailer interface 5 inches and softens the approach angle to 5.9 degrees so splitters, lips, and long overhangs clear cleanly without scraping. A solid high density EPS core and rugged polyurea coating keep the ramps light in the hand and strong under load, while a reinforced UHMW insert embedded into the shelf interface prevents compression and deformation where the ramp rests on the trailer. The result is a compact, durable loading solution that keeps your approach geometry consistent every time you load.
Features & Benefits
- 48 inch length and 5 inch height create a 5.9 degree approach angle that works with modern sports cars and mildly lowered vehicles.
- Solid, closed cell EPS core supports thousands of pounds without sagging, denting, or absorbing moisture.
- Chemically bonded skin resists abrasion and chemicals while providing a micro textured surface that grips tires and trailer decks.
- Embedded UHMW reinforcement at the trailer interface prevents compression and degradation at the contact point, maintaining ramp geometry over time.
- Rated at 1,750-lb per ramp, compared to 1,500-lb per ramp for many foam trailer ramps in this category.
- Integrated thermoplastic handles molded into the ramp body make it easy to carry and position each ramp one handed.
- EPS and polyurea combination will not rust, scratch coated floors, or transfer heat, and is impervious to water, oil, and most automotive chemicals.
- Designed by APEX to be a permanent solution, not a pile of scrap wood.
What's Included
- One pair (2 total) of 48" Lightweight Foam Trailer Ramps
- Integrated thermoplastic carry handles molded into each ramp body
- Embedded UHMW shelf reinforcement at the trailer interface
- Instructions for placement, safety guidelines, and recommended use
Specifications
| Load capacity per ramp | 1,750 lb (approx. 794 kg) |
| Load capacity per pair | 3,500 lb (approx. 1,588 kg) |
| Individual item weight (ea) | 7 lb (approx. 3 kg) |
| A - Length | 48 in (1,219 mm) |
| B - Width | 14 in (356 mm) |
| C - Height | 5 in (127 mm) |
| D - Trailer Shelf (D x H) | 4 in x 2 in (102 mm x 51 mm) |
| Approach angle | 5.9 degrees |
| Material - Core | High-density EPS structural foam |
| Material - Coating | Textured polyurea elastomer |
| Configuration | Set of 2 Trailer Ramps |
| Intended use | Extending trailer door/ramps for low-profile vehicles |
| Shipping weight | 16 lb (approx. 7 kg) |
Downloads
WARNING: California Prop 65
Warranty Information
- Free Shipping:
- Yes
Reviews
CALL US NOW
