Description
APEX 48 Inches Lightweight Foam 4-Post Ramp Kit (Set of 2)
The 48" Lightweight Foam 4 Post Ramp Kit from APEX is the ultra convenient, hook nose replacement for the heavy steel or aluminum ramps that came with your four post lift. Each 48 inch ramp delivers 5 inches of lift with a gentle 5.7 degree approach angle that is far friendlier for lower cars and performance vehicles. Designed for BendPak four post lifts, these APEX ramps are so light and easy to move you will never want to wrestle factory ramps again.
Features & Benefits
- Replaces heavy steel or aluminum ramps on BendPak HD-9 and HD-7 four post lifts with a structural foam and polyurea design that one person can easily move.
- Designed specifically to fit the ramp pockets on BendPak HD-9 and HD-7 series lifts for a positive, repeatable hook nose engagement.
- 48 inch length, 5 inch lift, and a 5.7 degree approach angle that is much friendlier to low and performance cars than most factory ramps.
- Internal S shaped reinforcement anchors deep into the core, so the hook acts as part of the ramp instead of a glued on afterthought.
- Solid, closed cell EPS supports thousands of pounds, will not rust, and does not absorb water, oil, or most common shop chemicals.
- Chemically bonded shell that resists abrasion and chemicals while providing a micro textured surface for tire and floor grip.
- Molded hand areas and balanced weight make it easy for techs or owners to move, hang, and store ramps quickly.
- Gentle on epoxy, sealed concrete, and painted floors with no sharp metal edges to gouge or stain.
What's Included
- One pair (2 total) of 48” Lightweight Foam 4 Post Lift Ramps with reinforced hook nose interfaces
- Integrated molded carry zones on each ramp for easy transport and storage
- Installation, compatibility, and safety guidelines
Specifications
| Load capacity per ramp | 1,750 lb (approx. 794 kg) |
| Load capacity per pair | 3,500 lb (approx. 1,588 kg) |
| Individual item weight (ea) | 11 lb (approx. 5 kg) |
| A - Length | 48 in (1,219 mm) |
| B - Width | 19 in (483 mm) |
| C - Height | 5 in (127 mm) |
| D - Hook Nose (W x H) | 14 in x 3.25 in (356 mm x 83 mm) |
| E - Approach angle | 6 degrees |
| Hook style | Reinforced hook nose for drop-in four-post lift ramp pockets |
| Core material | High density expanded polystyrene (EPS) structural foam |
| Coating material | Textured polyurea elastomer |
| Configuration | Set of 2 hook nose four post lift ramps |
| Intended use | Drive-on ramps for four-post vehicle lifts |
| Compatibility | BendPak four-post lifts |
| Shipping weight | 22 lb (approx. 10 kg) |
Downloads
WARNING: California Prop 65
Videos
Warranty Information
- Free Shipping:
- Yes
Reviews
CALL US NOW
