BendPak HDS-27 27,000-lb. Capacity Standard Length 4 Post Lift
This is where our lifts really step into the next level of lifting. If you need a bigger, better four-post lift that can handle a 27,000-lb., Class 7 semi-truck, you need the HDS27. Bigger sheaves and beefier components carry on our legacy of dependability. If your shop services commercial and/or municipal vehicles, a lift of this stature is practically mandatory. Get your hands on this utterly massive truck lift and bring a higher level of service to your garage or shop.
Features
- 27,000-lb. lifting capacity.
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493.
- Supersized 12" diameter cable sheaves.
- Galvanized lifting cables.
- Grease nipples.
- Single hydraulic under-runway cylinder.
- Integrated flow restrictor.
- Durable powder coat.
- Spring-loaded safety locks.
- Second lock system on constant guard.
- Fully enclosed lifting cables.
- Multiple adjustable height locking positions.
- Maintenance-free electric hydraulic power system.
- Conveniently positioned operator controls.
- 12" x 12" base plates.
- Non-skid runways.
- Optional rolling jack.
Specifications
| MODEL | HDS-27 |
| Lifting Capacity | 27,000 lbs. / 12,247 Kg |
| Max Capacity / Front Axle | 13,500 lbs. / 6,124 Kg. |
| Max Capacity / Rear Axle | 13,500 lbs. / 6,124 Kg. |
| A -Overall Width | 153-1/2” / 3899 mm |
| B -Outside Length | 257” / 6528 mm |
| C -Overall Length | 312-1/2” / 7940 mm |
| D -Height of Columns | 91-1/4” / 2318 mm |
| E -Min. Runway Height | 9-1/2” / 240 mm |
| F -Max. Rise | 60” / 1524 mm |
| G -Max. Lifting Height | 69-1/2” / 1764 mm |
| H -Width Between Columns | 133-1/2” / 3391 mm |
| I -Runway Width | 22” / 559 mm |
| J -Width Between Runways MIN | 40” / 1016 mm |
| J -Width Between Runways MAX | 45-1/4” / 1149 mm |
| K -Runway Centerline MIN | 67” / 1702 mm |
| K -Runway Centerline MAX | 72-1/4” / 1835 mm |
| L -Outside Edge of Runways MIN | 89” / 2261 mm |
| L -Outside Edge of Runways MAX | 94-1/4” / 2394 mm |
| M -Drive-Thru-Clearance | 109” / 2769 mm |
| N -Length of Runways | 256-1/2” / 6520 mm |
| Min. Wheelbase @ Rated Capacity | 185” / 4699 mm |
| Min. Wheelbase @ 75% Capacity | 160” / 4064 mm |
| Min. Wheelbase @ 50% Capacity | 135” / 3429 mm |
| Min. Wheelbase @ 25% Capacity | 110” / 2794 mm |
| Locking Positions | 13 |
| Lock Spacing | Every 4” / 100 mm |
| Lifting Time | 75 Seconds |
| Standard Motor | 220 VAC / 60 Hz. 1Ph |
*The design, material and specifications are subject to change without notice.
Optional Accessories (*Sold separately)
 |  |  |  | |||
| WSA-100 | DP-30 | Rolling Jacks | Airline Kit |
Downloads
