null

Challenger CL-16 2-Post Heavy-Duty Lift

Brand:
Challenger Lifts
SKU:
CL16-3S
Total Price:
$33,966.00 $24,116.14
(You save $9,849.86)
Free Shipping
Free Shipping

Challenger CL-16S 2-Post Heavy-Duty Lift

Specific Features of CL16 and CL20 Series

Challenger’s Heavy-Duty 2-Post lifts boast optimum flexibility with a lift designed from the anchors up to meet ALI/ANSI safety standards. These lifts have a capacity of 16,000lbs or 20,000lbs and can lift everything from compact cars to tall, heavy trucks. All put together, this lift is built to withstand the toughest of fleet maintenance. 

The CL16-3S has the capacity and height required to symmetrically lift service trucks and 3-stage front and rear arms to lift smaller vehicles asymmetrically. Additionally featuring low profile pickup pads and an adjustable width and height. 2ft height extensions are available for additional clearance.

  • Engineered to be wider, taller, and stronger. Ready to tackle the heaviest vehicles in any fleet. 
  • Single-point air actuated lock release allows the technician to disengage both columns simultaneously.
  • Oversized 5” diameter steel pulley and heavy-duty 3/8” cable reduces stress on equalization system and increases cable life.
  • 60” lifting carriage design increases lift life.
  • Adjustable width and symmetrical design allow easy access to the vehicle’s interior.
  • Dual integrated rubber door guards to prevent door damage.

Specifications For CL16-3S 

 Model Number  CL16-0-3S
 Description  16K Standard
 Lifting Capacity  16,000 lbs.
 Lift Configuration  Symmetric
 Arm Configuration  3-Stage Front/Rear
 Maximum Load Per Arm  4,000 lbs.
 Rise Height (Maximum with Stack Adapters)  Min. 75.5" Max. 81.5"
 Overall Height Options  162", 168", 174"
 Overall Width Options  166.75", 160.75", 154.75"
 Drive-Thru Clearance  104.25", 110.25", 116.25"
 Floor to Overhead Switch  155", 161", 167"
 Arm Reach  Min. 36.625" Max. 75"
 Screw Pad Height  Min. 4.75" Max. 6.5"
 Between Columns  120", 126", 132"
 Motor/Voltage  3HP, 1Ph, 60Hz, 208/230v
 Air Supply Required  90-120 psi
 Rise Time  62s
 Min. Ceiling Height Required  13'8", 14'2", 14'8"
 
 

Additional Parts and Accessories

Productivity Accessories
 Part No.  Description
 10317  Reducer bushing kit
 10333  Sprinter adapter kit - includes (2) pin adapters and (2) cradle adapters for 15000-3S series only
 B10264A  Air/electric workstation with filter/lubricator/regulator
 B99700  Tire Tool Manager Work Station with filter/lubricator/regulator
fffffff
 Power Upgrades
 Part No.  Description
 3PH217  Power Unit Upgrade to 3-Phase - 208V
 3PH239  Power Unit Upgrade to 3-Phase - 230V
 3PH469  Power Unit Upgrade to 3-Phase - 460V

Download

Manual

Spec Sheet

Brochure

Other Models

 Model Number  CL16-0-3S  CL16-2-3S  CL20-0  CL20-2
 Description  16K Standard  16K Extended Height  20K Standard  20K Extended Height
 Lifting Capacity  16,000 lbs.  16,000 lbs.  20,000 lbs.  20,000 lbs.
 Lift Configuration  Symmetric  Symmetric  Symmetric  Symmetric
 Arm Configuration  3-Stage Front/Rear  3-Stage Front/Rear  2-Stage Front/Rear  2-Stage Front/Rear
 Maximum Load Per Arm  4,000 lbs.  4,000 lbs.  5,000 lbs.   5,000 lbs.
 Rise Height (Maximum with Stack Adapters)  Min. 75.5" Max. 81.5"  Min. 75.5" Max. 81.5"  Min. 76.6" Max. 84.6"  Min. 76.6" Max. 84.6"
 Overall Height Options  162", 168", 174"  186", 192", 198"  162", 168", 174"  186", 192", 198"
 Overall Width Options  166.75", 160.75", 154.75"  166.75", 160.75", 154.75"  166.75", 160.75", 154.75"  166.75", 160.75", 154.75"
 Drive-Thru Clearance  104.25", 110.25", 116.25"  104.25", 110.25", 116.25"  104.25", 110.25", 116.25"  104.25", 110.25", 116.25"
 Floor to Overhead Switch  155", 161", 167"  179", 185", 191"  155", 161", 167"  179", 185", 191"
 Arm Reach  Min. 36.625" Max. 75"  Min. 36.625" Max. 75"  Min. 38.5" Max. 62"  Min. 38.5" Max. 62"
 Screw Pad Height  Min. 4.75" Max. 6.5"  Min. 4.75" Max. 6.5"  Min. 6.2" Max. 7.6"  Min. 6.2" Max. 7.6"
 Between Columns  120", 126", 132"  120", 126", 132"  120", 126", 132"  120", 126", 132"
 Motor/Voltage  3HP, 1Ph, 60Hz, 208/230v  3HP, 1Ph, 60Hz, 208/230v  3HP, 1Ph, 60Hz, 208/230v  3HP, 1Ph, 60Hz, 208/230v
 Air Supply Required  90-120 psi  90-120 psi  90-120 psi  90-120 psi
 Rise Time  62s  62s  62s  62s
 Min. Ceiling Height Required  13'8", 14'2", 14'8"  15'8", 16'2", 16'8"  13'8", 14'2", 14'8"  15'8", 16'2", 16'8"

 

Challenger Lifts Warranty Agreement

Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.

Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.

Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.

Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register.shtml

Description Model/Series Labor Functional Parts Structural parts Extended Warranty Available
CL10 CL10 1 Year 2 Years 5 Years Yes
10K 2-Post, 9K 2-Post LE10,  SA10,  CLFP9 1 Year 1 Year 5 Years No
12K, 15K, 18K 2-Post CL12, 15000, 18000 1 Year 2 Years 5 Years Yes
8K Inground EVW0820 1 Year 2 Years 2 years No
10K Ingrounds EV1020 1 Year 2 Years 5 Years Yes
12K, 15K Ingrounds EV1220, EV1520 1 Year 1 Year 5 Years Yes
14K 4-Post 4P14 1 Year 1 Year 5 Years No
15K 4-Post 4015 1 Year 2 Years 5 Years No
30K 4-Post Cable Drive 4030 1 Year 2 Years 5 Years No
30K, 40K, 60K Chain Drive 44030, 44040, 44060 1 Year 1 Year 1 Year No
Rolling Jacks RJ, SAJ 1 Year 1 Year 1 Year No
Mid and Short Rise MR-6, SRM-10 1 Year 1 Year 1 Year No
Scissors SX14, DX77 1 Year 1 Year 1 Year No
Mobiles CLHM 1 Year 1 Year 5 Years No
Accessories     90 days   No
Replacement Parts     90 days   No


Extended Warranty

An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.

Frequently Bought Together

Please choose options for all selected products

  • Choose Options