BendPak HDS-14X 14,000-lb. Capacity Extended 4 Post Lift
*Image 3: Shown with Rolling Jacks (Sold separately)
A longer four-post lift is useful for vehicles like limos, SUVs and trucks, and that’s where the HDS-14X comes in handy. We call it our “limo style” lift because of how much front-toback clearance it offers, so you can make it over or under the lift with ease. This lift adds additional versatility and craftsmanship to your garage.
Features
- 14,000-lb. lifting capacity.
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493.
- Mid to long-style approach ramps for low ground clearance vehicles.
- Runways include rail-kit for optional accessories.
- Single hydraulic cylinder mounted underneath runway.
- Fully enclosed lifting cables, safety locks and sheaves.
- Internal anti-sway slider blocks in each column.
- Pneumatic push-button safety release.
- Features heavy-duty 1/2" aircraft cable.
- Safety locks enclosed in columns minimize pinch points.
- Oversized sheave diameter reduces cable fatigue.
- Oversized self-lubricating cable rollers.
- Rugged 1.75" roller axles.
- Multi-position safety locks in each column.
- Customizable power unit location.
- Approach ramps incorporate built-in rear-wheel chocks.
- Independent backup slack-cable safety latches.
- Runways feature non-skid surface.
- Optional drive-thru ramps available.
- Optional drip trays available.
- Optional 7,000-lb. capacity rolling jacks available (Model RBJ7000).
- ETL approved.
Specifications
| Model | HDS-14X |
| Lifting Capacity | 14,000 lbs. / 6,350 kg |
| Max capacity at Front Axle | 7000 lbs. / 3175 kg |
| Max capacity at Rear Axle | 7000 lbs. / 3175 kg |
| a Min. runway height | 7.5" / 192 mm |
| b Maximum rise | 70" / 1,778 mm |
| c Maximum lifting height | 77.5" / 1,969 mm |
| d Overall width (1) | 130" / 3,304 mm d1:131.75" / 3,346 mm |
| e Outside length | 243" / 6,172 mm |
| f Overall length | 271" / 6,893 mm |
| g Height of post | 92" / 2,337 mm |
| h Distance between posts | 120" / 3,046 mm |
| i Drive-thru clearance | 98" / 2,482 mm |
| j Runway width | 20" / 508 mm |
| k Runway length | 233" / 5,918 mm |
| l Width between runways | 34.5" or 41.5" / 876 – 1,054 mm |
| m Runway centerline to centerline distance | 56" or 63" / 1,422 or 1,600 mm |
| n Outside edge to outside edge of runways | 78" or 85" / 1,981 or 2,150 mm |
| Min. wheelbase @ rated capacity (2) | 170" / 4,318 mm |
| Min. wheelbase @ 75 capacity (2) | 145" / 3,683 mm |
| Min. wheelbase @ 50 capacity (2) | 120" / 3,048 mm |
| Min. wheelbase @ 25 capacity (2) | 95" / 2,413 mm |
| Safety Lock positions | 13, spaced every 4 in. / 102 mm |
| Lifting time | 60 seconds |
| Motor | 220 VAC, 60 Hz, 1Ph (Special voltages available upon request) |
1. Overall Width is defined as the dimension outside to outside of the Baseplates. Use d measurement listed above for creating Chalk Lines. The d1 measurement above includes the Bolt, Washer and Nut extending out near the bottom of the Posts used for securing the Safety Ladders.
2. The Lift supports less weight than its rated capacity if the Vehicle’s wheelbase is shorter; this is because the wheels are closer to the middle of the Runways, where there is less strength. For example, the maximum weight allowed on the Lift for a Vehicle with a wheelbase of 100" is 50 percent of the Lift’s rated capacity (or 7,000 lbs. when the rated capacity is 14,000 lbs.).
*Specifications subject to change without notice
Optional Accessories (*Sold separately)
|
|
|
|
 |
|||
| WSA-100 | Rolling Jacks | DP-30 | Airline Kit |
Downloads
