Loading... Please wait...


Hofmann 650Combo Alignment Equipment Package

Hover over image to zoom

  • Hofmann 650COMBO1 Geoliner 650 + 12k Scissor Alignment Equipment Package
  • Hofmann Geoliner 650
  • 12k Scissor Alignment Lift
RRP: $50,709.00
$35,900.00 (You save $14,809.00)
Factory Shipped. Delivery Time: 5-8 Business Days
Free Shipping

 Product Description

Hofmann Alignment Equipment Package 

Alignment Combo Includes:

  • Hofmann Geoliner 650 Wheel Alignment Computer W/ FREE Choice of Camera Mounting Fixture - (EAA0321J01A, EAA0321J19C, EAK0289J64A, EAK0289J79A)
  • Hofmann 12,000 lbs. Scissor Lifts w/ 2-Rolling Jacks and Rear Slip Plates
  • Package Includes Camera Mounting Fixture EAA0321J19C, Turntables EAK0289J06A, Rollback Kit EAK0277J28A, Install up to $1000.00 & Freight

Hofmann Geoliner 650 Wheel Alignment Computer

The Geoliner 650 imaging alignment system is equipped with our basic software package which combines the benefits of camera technology and quality at an affordable cost. Our patented VODI Graphic Display is used with High-Definition (HD) cameras to provide visual and directional assistance to the technician during the alignment measuring procedure. The Geoliner 650 will boost your shops productivity by allowing technicians to do more alignments is less time compared to conventional systems. (Shown with Optional Variable-Height Camera Support)

Hofmann Geoliner™ 650 Wheel Alignment Computer

Set-up To Readings In Under 2 Minutes

  • Imaging technology allows you to do more alignments in less time. The patented non-electronic shatter-proof wheel targets eliminate service calls for calibrations and wheel sensor maintenance.

EZ-Link* Steering Angle Sensor Reset

  • EZ-Link* software alerts the technician of OEM service and maintenance procedures related to Electronic Stability Control and Electric Power Steering systems.
  • OEM instructions guide the technician through the process of resetting the steering angle sensors along with other sensors as required. EZ-Link includes manual as well as electronic resets.


  • High-Definition Imaging Cameras allow for system installation within a smaller shop bay!


  • VODI™* Graphic Display - graphic overlay around each camera provides visual and directional assistance to the operator during the alignment measurement.

2-Wheel Alignment Capability*

  • Great for performing 2-wheel alignment checks on fixed rear axle vehicles. Camber and Toe measurements in less than one minute!

Animated Adjustment Aid

  • Technicians benefit from on-screen visual aids for vehicle-specific adjustments, including instructions, comments and necessary tools.

24" Universal Wheel Clamps

  • Heavy-duty chrome rods and nickel-plated screw
  • Thin profile tip fits most wheel/tire combinations
  • Extended tip with thin profile allows clamping over plastic wheel covers
  • Outside clamping for 15" to 24" wheels
  • Inside clamping for 13" to 20" wheels
  • Constructed from aluminum for light-weight handling. Silver finish for durability and corrosion resistance
  • Optional Clamp Extensions (EAK0268J62A) increase maximum clamping diameter to 28"

Optional Alloy Quick Clamp Kit

  • (EAK0268J63A) Allows accurate clamping without risk of scratching the wheel finish. Provides secure attachment to wheel while plastic sleeves placed over standard claws ensure proper placement and wheel protection.


  • SAI and Thrust Angle
  • Included Angle
  • Toe Out On Turns/Max Turn
  • Front and Rear Toe
  • Front/Rear/All/Zoom Readings
  • FrameCheck™ Light Truck Frame Angle
  • Initial/Final Color Printouts
  • Individual Camber/Caster/Toe
  • Front Caster (-28° to +28°)
  • Front & Rear Camber (-15° to +15°)
  • 3D Animation
  • Video Help
  • A-Arm Adjustments
  • Adjust Camber Only
  • Elevated Adjustments
  • Rear Shim Programs
  • Multiple Lift Support (3)
  • Vehicle Specs: 25+ years
  • EZ-Link™*
  • EZ-Toe™*
  • Equalize Toe Warning
  • Adjust Front Before Rear Warning
  • Ride Height*
  • Multiple Clamp Support
  • 2-Wheel Alignment
  • 32 Languages
  • Multiple Print Formats
  • Custom Vehicle Specifications
  • Regional Specifications
  • Integrated Help System (PDF)
  • Tools, Parts, and Adjustment Instructions
  • Advanced Customer Database with Backup/Restore
  • Multiple Units of Measure
  • Caster and SAI on Turntables
  • SAI Elevated
  • Live Caster, Camber and Toe - Turntables
  • Live Caster, Camber and Toe - Elevated
  • NorthStar Shim Program
  • Light Truck Bushing
  • Remote Control (Optional)
  • Variable-Height Camera Support Controls


Wheel Size 13" - 24"
Tire Diameter Unlimited
Track Width 48" - 96"
Wheelbase 79" - 180"
Power Requirements 120/230V, 1Ph, 60HZ


Standard Accessories

Part NumberDescription
00055502000 Steering Wheel Holder
00000096000 Brake Pedal Depressor
EAA0305J48B Camera Beam Assembly
EAK0268J52A Universal Wheel Clamps (13" - 24", Set of 4) and Shatter-proof Imaging Targets (2 Front and 2 Rear)
Recommended Accessories
Part NumberDescription
EAK0289J06A Premium Turntables
EAK0277J28A Paddle Kit for Premium Turntables
EAK0277J39A 4-Post Rollback Kit
EAK0277J40A 12K Scissor Rollback Kit
EAK0277J47A 12K Scissor Roll Forward/Rollback Kit
EAK0277J67A 10K/14K Scissor Rollback Kit
EAK0277J45A Hunter/Rotary Rollback Kit
Optional Accessories
Part NumberDescription
8-05320A Frame Angle Gauge
EAK0268J62A Universal Wheel Clamp Extension Kit (to 28")
EAK0268J63A Alloy Quick Clamp Kit
EAK0268J08A Remote Display Readout with 30’ Cable
EAK0289J35A Convex Mirror Kit
EAK0289J71A Universal Wheel Clamp Floor Stand
Optional Camera Support Configurations
Part NumberDescription
EAA0321J19C Variable-Height Camera Support
EAA0321J01A Fixed-Height Camera Support
EAK0289J36A Wall/Pit Camera Support (Adjustable 36" - 60". Includes Convex Mirror)
EAK0289J63A Wall/Pit Camera Support (8")
EAK0289J64A Electronic-Tilt Camera System

Hofmann EELR709A 12K Scissor Alignment Lift

The Hofmann 12k Scissor Alignment Lift is a rugged 12,000 lb capability scissor placement lift with open front design that offers simple access to positioning service and calibration locations. "Pro-Style" 24" large runways offer simple drive-on for big automobiles. Hydraulic equalization and complete support rear member provide repreatable smooth level lifting. Flush mounted rear slip plates with durable encapsulated bearings support and offer smooth motion to reduce rear placement modifications.

Hofmann Monty 5800WL


Durable Compact Design

  • Utilizes less space than conventional four post lifts
  • Lifts straight up - no for or aft movement
  • Compact, enclosed control console
  • Quad counterpoised lifting system with four heavy-duty cylinders to maintain a constant level from floor to full cylinders to maintain a constant level from floor to full lift height with reinforcing rear mounted cross member

Multiple Safety Systems for Maximum Operated Protection

  • Auto engaging mechanical locks
  • Cross linked hydraulic circuit to four lifting cylinders
  • Hydraulic flow valves
  • Dual engaging twin interlocking serriform mechanical safety racks with pneumatic release
  • Conforms with current ANSI/ALI ALCTV:2011 lift standard
  • Reinforced 24" Pro-Style runways with non-skid surface accommodates a wide vehicle range
  • Open front design provides easy access to alignment service and calibration areas of vehicles
  • Smooth lift operation - gliding bearings are captured providing durable smooth lift operation
  • Adjustable turn plate pocket depth ensures level positioning of turn plates
  • Secondary lifting provides two powerful 6,000 lb capacity air/hydraulic jacks
  • Unique approach ramps expands from 59" to 76", easing loading of lower profile vehicles
  • Flush mounted rear slip plates include heavy-duty encapsulated bearings to ease rear alignment adjustments


Maximum Capacity

12,000 lbs (5443 kg)

Overall Width

90" (228.6 cm)

Overall Length

267 3/8" (679 cm)

Width Between Runways

40" (101.6 cm)

Four Wheel Alignment Wheelbase

89" to 158" (226 cm to 401 cm)

Two wheel Alignment Wheelbase

Up to 165" (419 cm)

Service Wheelbase

179" (455 cm)

Runway Surface Width

23" (58 cm)

Maximum Raised Height

70" (178 cm)

Lifting/Lowering Time (Fully Loaded)

55 Seconds

Console (DxWxH

16.5" x 14.125" x 45.75"
(42 cm x 36 cm x 121 cm)

Air Supply Requirements

90 - 140 PSI @ 5 - 10 CFM

Shipping Weight

6615 lbs (3001 kg)

Optional Front Radius Turn Plates (Set of Two)


 *It is the buyer's responsibility to unload the freight at their location.

 Warranty Information

Hofmann USA warrants to the original purchaser that its equipment installed in the United States will be free from defects in materials and workmanship. Should any failure in the above mentioned warranty on workmanship and material appear within one (1) year of delivery, Hofmann USA shall, upon being satisfied that its product has been properly handled, stored, installed, and operated, correct such defects by repair or replacement at its expense. Any service labor required by reason of repair or replacement within six (6) months will be provided free of charge.

No warranty is made to any equipment which has been altered or repaired by anyone other than an authorized service representative of Hofmann USA, or as to any product which has been subject to abuse, misuse or negligence. This warranty only covers equipment delivered and used in the United States.





 Product Reviews

 Find Similar Products by Category

You Recently Viewed...


What's News

JMC Newsletter

Sign up for Exclusive Deals and Coupons

jmcautomotiveequipment.com has a Shopper Approved rating of 4.8/5 based on 282 ratings and reviews