null

EMAX 20HP V4 1PH 240 gallon Horizontal Duplex mounted alternating Piston Compressor -With Pressure Lube Pump

Brand:
EMAX Compressors
SKU:
EP10D240V1
Condition:
New

Factory Shipped

Total Price:
$10,843.02 $9,036.00
(You save $1,807.02)
Shipping Calculated at Checkout
Shipping Calculated at Checkout

Factory Shipped

EMAX 20HP V4 1PH 240 gallon Horizontal Duplex mounted alernating Piston Compressor -With Pressure Lube Pump

Overview

Brand: Emax Compressor
Manufacturer's Part Number: EP10D240V1
Part Type: Air Compressors, General Use
Product Line: EMAX Industrial Piston Compressors
Summit Racing Part Number: EMX-EP10D240V1
UPC: 815002018164
Compressor Type: Stationary, horizontal
Tank Included: Yes
Tank Capacity: 240 gallon
Compressor Power Source: 230 V AC
Compressor Pump Style: Two stage
Compressor Pump Lubrication: Oiled
Compressor Motor Horsepower: 10 hp
Compressor Amps: 40.0 amps
Maximum Pressure (psi): 175 psi
CFM: 39 at 100 psi
Air Lines Included: No
Pressure Gauge Included: Yes
Case Included: No
Mounting Brackets Included: No
Quantity: Sold individually.
Notes: Includes pressure lube pump.

Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup.

Industrial Series compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. With low harmonic distortion, these motors provide much higher torque in cold weather starting, and require less electricity to start. Other features include large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms.

EMAX uses only taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts to drive their pumps. Dual belts ensure long belt life with low vibration for smoother, quieter operation because dual belts do not have to be as tight as a single belt. Tighter belts put more load on the compressor pump and the motor bearings; that decreases the life of both. Much better than a fixed bore pulley with a set screw; the taper-lock design locks the pulley in position on the motor shaft preventing it from loosening or moving. 

FEATURES:

  • Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications
  • Built-in inter-coolers and after-coolers
  • OSHA-approved, 13-gauge steel, expanded metal belt guards
  • ASME code-compliant tanks
  • Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles
  • 100 percent brass check valves, safety valves, and ball valves
  • Top-quality plumbing fittings
  • Big 1 3/8 in. output shafts
  • 15 Service Factor motors can be pulled 15 percent over full load

Frequently Bought Together

Please choose options for all selected products

  • Choose Options