null

Dannmar DT-50A Tire Changer, DB-70 Balancer, and Weights Package Deal

Brand:
Dannmar
SKU:
DA-5140162
Condition:
New

Factory Shipped.

Total Price:
$7,000.00 $5,834.00
(You save $1,166.00)
Free Shipping
Free Shipping

Factory Shipped.

Dannmar DT-50A Tire Changer, DB-70 Balancer, and Weights Package Deal

Dannmar helps you increase your shop’s workflow with a nicely-equipped tire changer paired with a quick-operating wheel balancer. The package includes a single-tower assist, swing-arm tire changer equipped for direct wheel service, plus a proven dynamic wheel balancer to ensure smooth-spinning results. With these Dannmar machines, your technicians can keep the workflow moving and your busy customers happy.

This Dannmar wheel service package consists of a DT-50A tire changer with a swing arm that is equipped with a handy power-assist tower to help when working on sometimes difficult, lower-profile performance tires with stiffer sidewalls. The swing-arm on the DT-50A is one of this tire changer’s most useful features. Because it doesn't tilt back, it can be installed flush against a wall. The tire changer’s controls are conveniently mounted upfront and logically arranged for both speed and ease-of-use. Constructed to handle the needs of on-the-go shops with its sturdy body, rigid hexagonal vertical shaft and hardened-steel horizontal outrigger support arm that eliminates flex during tire service operations. This also reduces the risk of damaging modern allow wheels.

The Dannmar DB-70 balancer works on wheels up to a 28” diameter. Dannmar’s very accurate and dependable balancer uses proprietary Digital Sensor Technology for critical reliability and repeatability. With this science, it automatically determines the exact weight needed for optimal balance and uses brightly displayed LEDs that shows the correct amount and location of weights in about six seconds. Best of all, this well-performing, wheel service package is affordable.

FEATURES

DT-50A Features

  • Alloy steel mount and demount head w/protective plastic covers
  • Traveling drop-center, top-mount helper/swing-in bottom helper disc
  • High Torque Electric Turntable
  • Adjustable Internal Rim Clamping - Capacity - 12” – 21” (304 mm - 533 mm)
  • Maintenance-free gearbox
  • Aluminum pneumatic cylinders
  • High-pressure polyurethane pneumatic tubing
  • Enhanced bead Breaker Blade
  • Turbo-Blast Bead Seater
  • Inflation Gauge with Integrated Air Dump Valve
  • Tool Tray/Storage
  • Soap Bucket
  • Enhanced Bead Breaker Blade
  • Oiler/Lubricator
  • Optional motorcycle clamps
  • Air Regulator
  • Inflation restraint
  • Forged steel foot pedals

DB-70 Features

  • Top positioning weight locator
  • Inside and outside measuring
  • Manual wheel offset distance setting
  • Auto-start when hood is lowered
  • Wheel holding manual brake pedal
  • Truck cone/spacer ring adapter set
  • Wheel calipers
  • No-mar rear cone mount pressure cup
  • Quick-release and mount hub nut
  • Tape weight feeder
  • LED rolling wheel weight displays

SPECS

DT-50A Specifications

Motor 110-VAC, 50-60 Hz, 1-Ph
Drive System Type Electric / Air
Tower Design Rigid Fixed / Swing Arm
Power Assist Tower Single
Bead Seating System Turbo Blast / Bead Seating
Air Requirement 110-175 PSI (8-10 BAR)
Wheel Clamping Method 4 Clamps - Internal / External
Table Clamping System Dual Pneumatic Cylinders
Bead Breaking System Pneumatic Blade
Tower Design Fixed
Internal Rim Clamping Capacity 14” – 26” (356 mm - 660 mm)
External Rim Clamping Capacity 12” – 24” (305 mm - 610 mm)
Turntable Rim Width Capacity 3” – 15” (76 mm – 381 mm)
Bead Breaker Rim Width Capacity 3” – 14” (76 mm – 356 mm)
Maximum Tire Diameter 49” (1,245 mm)
Noise <70 dB

DB-70 Specifications

Motor 110-230 VAC, 50-60 Hz, 1-Ph
Cycle Time 7 seconds
Balancing Modes 6 Dynamic / 1 Static
Drive System Serpentine Poly-V Belt
Wheel Braking Lever Caliper Brake / Foot Pedal
Cones Included 4
Max. Tire Diameter 49” (1,247 mm)
Max. Tire Weight 150 lbs. (68 kg)
Wheel Diameter Capacity 10” - 28” (254 mm - 711 mm)
Wheel Width Capacity 1.5” - 20” (38 mm - 508 mm)
Balancing Increments 0.25 or 0.01 ounce
Balancing Speed 260 RPM
Accuracy +- 1 Gram (.035 oz)
Noise <70 dB

SPEC SHEET

WARRANTY

Duration: From the date of purchase by original Purchaser or 36-months months from the date of shipment by Dannmar or whichever comes first.  Three Years (36-Months) Warranty on the lift structure [*] [**]  One Year (12-Months) Warranty on the hydraulic cylinder(s) and power unit [*] [**]  One Year (12-Months) Warranty on operating components [*] [**]  One Year (12-Months) Warranty on electrical components (excluding power unit) [*] [**] Limited Warranty 1. Who gives this warranty (Warrantor): Dannmar, 1645 Lemonwood Dr., Santa Paula, CA 93060 2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale) 3. What products are covered by this warranty (Product): Any Dannmar Two-Post or Four-Post Vehicle Service Lift** 4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below. 5. What is not covered under this warranty: a. Freight and shipping charges related to warranty performance. b. Onsite labor or factory labor associated with warranty performance. c. Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service Product in accordance with instructions provided in the owner’s manual(s) supplied. d. Any damage caused by overloading Product beyond rated capacity. e. Items or service normally required to maintain the Product, i.e. lubricants, oil, etc. f. Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship. g. Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings. h. Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants. i. Rusted components due to improper maintenance or corrosive environments. j. Cosmetic defects that do not interfere with Product functionality. k. Damage due to incorrect voltage or improper wiring. l. Any failure that results from improper installation or use not according to specifications. m. Damage caused by disasters such as fire, flood, wind, and lightning. n. Damage caused by unauthorized attachments or modifications. 6. Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor's option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. Warrantor will pay reasonable labor costs for the first 12 months only. 7. Responsibilities of Purchaser under this warranty/ notice of claims: a. Provide dated proof of purchase and maintenance records. b. In some cases, components may be required to be shipped to the nearest Dannmar Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser. c. Use reasonable care in the operation and maintenance of the Products as described in the owner's manual(s). d. Immediately upon receipt of the Product, Purchaser shall inspect the same. Any claim for shortage must be made within ten days after Purchaser's receipt. All other claims, including claims for alleged defective Product, must be made within fifteen days after Purchaser learns of the facts upon which such claim is based, but in no event later than the applicable one, two or five year period specified above for the specified component(s). All claims not made in writing and received by Seller within the time periods specified above shall be deemed waived. With respect to any defects incapable of discovery until in use, all claims for any damages or losses as a result of such defects shall be deemed waived unless made in writing and received by Seller within fifteen days after Purchaser learns of the alleged defect giving rise to the claim and after the expiration of said periods, but in no event later than the applicable one, two or five year period specified above for the specified component(s). Purchaser expressly assumes all liability for all such damages or losses, irrespective of any use which shall have taken place or whether the alleged defect shall have occurred or been discovered prior to expiration of such periods. 8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts. 9. *As determined by Warrantor in its sole discretion**For all Dannmar brand Two-Post or Four-Post Vehicle Service Lifts (excluding specialty lifts, high rise, commercial parking, material handling, or models for particular purpose) manufactured on or following 6/1/2020.

Frequently Bought Together

Please choose options for all selected products