Challenger Lifts AR4015EAX 15,000 Lbs Closed Front Alignment Rack Package

SKU:
AR4015EAX
Condition:
New

Factory Shipped. Delivery Time: 5-8 Business Days

  • Challenger Lifts 10310 Air/Electric Workstation
  • Challenger Lifts RJ7.5 Air/Hydraulic Rolling Jack 7,500 Lb. Capacity
  • Challenger Lifts 40200-3D Bolt On Alignment Kit W/O Turn Plates (40200-3D)
  • Challenger Lifts 40200-3DSS Bolt On Alignment Kit W/ Stainless Steel Turn Plates
  • Challenger Lifts 40200-3DBK Bolt On Alignment Kit With Black "Powder Coat" Turn Plates
  • Challenger LIfts 10266 Ramps
Total Price:
$26,230.10 $18,089.70
(You save $8,140.40)
Free Shipping
Free Shipping

Factory Shipped. Delivery Time: 5-8 Business Days

Challenger Lifts AR4015EAX 15,000 Lbs Closed Front Alignment Rack Package

Challenger Lifts' 4015series 15,000 lb. four post automobile lifts has a full package for broadening your service profits. The 4015series 4 post lift is available in a number of setups including open front general service flat deck car lifts and closed front general service flat deck automobile lifts and alignment rack car lift packages that support today's most current camera imaging positioning systems. With the 4015series 4 post automotive lift, companies have the ability to service the smaller automobiles and medium-duty trucks, vans and fleet vehicles on one vehicle lift.

The 4015 series 4-post hydraulic car lifts have a cable lifting design, operate 208-230v single phase electrical power (optional 3-phase readily available), have a single point air actuated lock launch that disengages all column locks concurrently for maximum performance and workflow. 4015series four post car lifts flaunt the most working space below the runways with the highest increase in the market at 78", and the lowest profile runways in the automobile lift business at 7". With large 9 1/2" steel pulleys with Teflon ® bearings, 1/2" cable thickness, totally gusseted base plate and top shroud, offset wrapped column design and louvered approach ramps with anti-skid runway surfaces, the 4015series 4 post lift is constructed to lift and constructed to last.

Alignment Rack models consist of a bundle of two 7,500 pound. rolling jacks, internal air line system for the dual rolling jacks, flush mount stainless steel turning radius evaluates, rear slip plates, multi-position work-steps and automatic wheel stops.

Featuring a max wheelbase variety of 182 1/2" or 210", the 4015 4 post vehicle lift accommodates every little thing from smaller sized automobile and trucks to medium duty fleet operation cars for general service. And with a 4 wheel placement range (Placement Rack auto lift models just) from 88" to 158", stores widen their service abilities and make even more cash by carrying out placements on all kinds of automobiles.

Challenger Lifts AR4015EAX

DESCRIPTION:


Closed-Front Alignment Rack Package - 11' 2-1/2" overall width, 20' 4-1/2" Overall Extended Length. Includes (2) RJ7.5 rolling jacks, internal air line kit, flush mount stainless steel turning radius gauges, rear slip plates, turn plate bridges, multi-position work-steps and automatic wheel stops

Features:

  • 78" rise height, the highest rise in the industry provides maximum head room for working underneath vehicles.
  • 80" rear recessed free floating slip plates offer a wider range of 4 wheel alignment capacities and accommodates longer wheelbase vehicles.
  • 14 level lock positions allows technician to work at an ergonomic working height to increase productivity and minimize fatigue.
  • 9-1/2" steel pulleys, Teflon® bearing and 1/2" cable diameter minimizes undo wear and tear and prolong pulley and cable life.
  • Heavy-Duty front bearing and yoke assemblies distribute contact load to reduce column stress for longer product life.
  • Recessed stainless steel turning radius gauges provide more precise alignment readings.
  • Fully gusseted base plate design reduces column deflection and makes lift less sensitive to uneven floors.
  • Louvered approach ramps and non-skid runway surface prevent wheel spin and provide positive vehicle traction and technician safety.
  • Single point air actuated lock release disengages all column locks simultaneously. 10. 7" runway height allows easy access for lower profile vehicles.
  • 7" runway height allows easy access for lower profile vehicles.

Specifications:

 

Open Front
Closed Front
Alignment Rack Package
Flat Deck
Alignment Rack Package
Flat Deck
Model Number
AR4015EAO
AR4015XAO
4015EFO
4015XFOAR4015EAXAR4015XAX4015EFX4015XFX

Lift Capacity

15,000 lbs.
15,000 lbs.
A Length Overall
20' 9" (6325mm)
23' (7010mm)

20' 9" (6325mm)

23' (7010mm)
20' 4-1/2" (6210mm)
22' 8" (6909mm)
20' 4-1/2" (6210mm)
22' 8" (6909mm)
B Width Overall
11' 10" front - 11' 2-1/2"rear
(3607mm front - 3416mm rear)
11' 2-1/2" 
(3416mm)
CInside Columns
120" front - 120" rear
(3048mm front - 3048mm rear)
120"
(3048mm)
D Between Columns
195" (4953mm)
222 1/2" (5652mm)
195" (4953mm)
222 1/2" (5652mm)
196" (4978mm)
223 1/2" (5677mm)
196" (4978mm)
223 1/2" (5677mm)
E Height of Columns
8' 3-1/2" front - 7' 9-1/2"rear
(2527mm front - 2375mm rear)
7' 6-1/2"
(2299mm)
F Height of Runways
7" (178mm)
7" (178mm)
G Width of Runways
20" (508mm)
20" (508mm)
H Width between Runways 
(Minimum / Maximum)
43" (1092mm)
40" / 43" 
(1016mm / 1092mm)
I Maximum Wheelbase1
182 1/2"
(4635mm)
210"
(5334mm)
182 1/2"
(4635mm)
210"
(5334mm)
182 1/2"
(4635mm)
210"
(5334mm)
182 1/2"
(4635mm)
210"
(5334mm)
J Rise Height
78" (1981mm)
78" (1981mm)
Max. 2 Wheel Alignment
166 1/2" (4229mm)
194" (4927mm)
N/A
166 1/2" (4229mm)
194" (4927mm)
N/A
4 Wheel Alignment
88" - 158" 
(2235mm - 4013mm)
N/A
88" - 158" 
(2235mm - 4013mm)
N/A
Air Supply Required
90 -120 psi Clean & Dry
90 -120 psi Clean & Dry
Motor
2HP
2HP
Voltage (1 Phase Std.)2
208v - 230v
208v - 230v
Speed of Rise
85 seconds
85 seconds
Min. Recomm. Bay Size
12´ x 24"
12´ x 26"
12´ x 24"
12´ x 26"
12´ x 24"
12´ x 26"
12´ x 24"
12´ x 26"
Shipping Weights
4800 lbs.
(2177 kg)
4950 lbs.
(2245 kg)
3980 lbs.
(1805 kg)
4160 lbs.
(1887 kg)
4400 lbs.
(1996 kg)
4600 lbs.
(2087 kg)
3610 lbs.
(1637 kg)
3790 lbs.
(1719 kg)

1 Maximum wheelbase is based on a tire diameter of 30".
2 Optional 3 phase electrical also available.
Standard Lift colors are Red and Blue. Optional colors available.

4015series Two Post Lifts
 

Accessories: 

Part# 10266   Part# 10310   Part# 10342   Part# 10310   
   
        Part#10266                    Part#10310                   Part# 10342                       Prt# 3ph4p          
 
 Part# RJ7.5   Part# 40230E   Part# 40200-3D   Part# 40200-3DBK
 
         Part# RJ7.5                   Part# 40230e              Part# 40200-3d             Part# 40200-3dbk
 
Part# 10266   Part# RJAB6   Part# 10267
 
   Part# 40200-3dss            Part#10500ss                  Part# 10267

Challenger Lifts Warranty Agreement

Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.

Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.

Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.

Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register.shtml

Description Model/Series Labor Functional Parts Structural parts Extended Warranty Available
CL10 CL10 1 Year 2 Years 5 Years Yes
10K 2-Post, 9K 2-Post LE10,  SA10,  CLFP9 1 Year 1 Year 5 Years No
12K, 15K, 18K 2-Post CL12, 15000, 18000 1 Year 2 Years 5 Years Yes
8K Inground EVW0820 1 Year 2 Years 2 years No
10K Ingrounds EV1020 1 Year 2 Years 5 Years Yes
12K, 15K Ingrounds EV1220, EV1520 1 Year 1 Year 5 Years Yes
14K 4-Post 4P14 1 Year 1 Year 5 Years No
15K 4-Post 4015 1 Year 2 Years 5 Years No
30K 4-Post Cable Drive 4030 1 Year 2 Years 5 Years No
30K, 40K, 60K Chain Drive 44030, 44040, 44060 1 Year 1 Year 1 Year No
Rolling Jacks RJ, SAJ 1 Year 1 Year 1 Year No
Mid and Short Rise MR-6, SRM-10 1 Year 1 Year 1 Year No
Scissors SX14, DX77 1 Year 1 Year 1 Year No
Mobiles CLHM 1 Year 1 Year 5 Years No
Accessories     90 days   No
Replacement Parts     90 days   No


Extended Warranty

An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.

Frequently Bought Together

Please choose options for all selected products

  • Choose Options
    • Challenger Lifts 10310 Air/Electric Workstation
    • Challenger Lifts RJ7.5 Air/Hydraulic Rolling Jack 7,500 Lb. Capacity
    • Challenger Lifts 40200-3D Bolt On Alignment Kit W/O Turn Plates (40200-3D)
    • Challenger Lifts 40200-3DSS Bolt On Alignment Kit W/ Stainless Steel Turn Plates
    • Challenger Lifts 40200-3DBK Bolt On Alignment Kit With Black "Powder Coat" Turn Plates
    • Challenger LIfts 10266 Ramps