Challenger Lifts 44012LR 12,000 Lbs Four Post "Chain Driven" Lube Rack

Description:

Challenger Lifts 44012LR/DLR is the best choice for a two person oil change operation. This Lube Rack is optimized for speed and efficiency. Its design allows one person to check fluids under the hood while standing on the diamond plated catwalk and another underneath, to change filters and fluids.

With optional drive thru ramps and oil drain pan, the 44012LR/DLR Four Post Lift is a perfect supplement to any service facility. Click here for the Challenger 44012DLR Dual Four Post "Chain Driven" Lube Rack

Features:

Walkways and handrails provide safety and security allowing 2 people to work on oil changes.
Optional 32 gallon oil drain pan needs emptied less often which increases productivity.
Front gate and moving ladder with wheels provide convenience and drive-thru flexibility.
Optional drive-thru ramps enables lift to be in drive-thru service application.

Specifications:

Model Number	44012LR	44012DLR
Lift Capacity	12,000 lbs.
Max. Wheelbase	216"
A Rise Height	77-3/4
B Length Overall	22' 6-1/4"	22' 3/4"
C Width Overall	12' 4-1/4"	26' 9"
D Height Overall	100-1/2"	144-1/2"
E Inside Columns	133"
F Between Columns	221"
G Height of Columns	83-3/4"
H Width of Runways	20-1/2"
I Height of Runways	6-3/4"
J Width Between Runways	42-1/2"
Motor	2HP
Voltage	208v - 230v
Speed of Rise	80 seconds
Min. Recommended Bay Size	15' 6" X 25'	30' X 24' 6"
Shipping Weight	3675 lbs. (1667 kg)	7550 lbs. (3425 kg)

Accessories:

Part#10310 Part# 40230e Part# 40200-3d Part# 40200-3dbk

Part# 40200-3dss

*Shipping is FREE to direct points within the 48-contiguous states.

***It is the buyer's responsibility to unload the freight at their location.

Challenger Lifts Warranty Agreement

Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.

Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.

Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.

Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register.shtml

Description	Model/Series	Labor	Functional Parts	Structural parts	Extended Warranty Available
CL10	CL10	1 Year	2 Years	5 Years	Yes
10K 2-Post, 9K 2-Post	LE10, SA10, CLFP9	1 Year	1 Year	5 Years	No
12K, 15K, 18K 2-Post	CL12, 15000, 18000	1 Year	2 Years	5 Years	Yes
8K Inground	EVW0820	1 Year	2 Years	2 years	No
10K Ingrounds	EV1020	1 Year	2 Years	5 Years	Yes
12K, 15K Ingrounds	EV1220, EV1520	1 Year	1 Year	5 Years	Yes
14K 4-Post	4P14	1 Year	1 Year	5 Years	No
15K 4-Post	4015	1 Year	2 Years	5 Years	No
30K 4-Post Cable Drive	4030	1 Year	2 Years	5 Years	No
30K, 40K, 60K Chain Drive	44030, 44040, 44060	1 Year	1 Year	1 Year	No
Rolling Jacks	RJ, SAJ	1 Year	1 Year	1 Year	No
Mid and Short Rise	MR-6, SRM-10	1 Year	1 Year	1 Year	No
Scissors	SX14, DX77	1 Year	1 Year	1 Year	No
Mobiles	CLHM	1 Year	1 Year	5 Years	No
Accessories			90 days		No
Replacement Parts			90 days		No

Extended Warranty

An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.