Challenger Lifts 18002 Heavy Duty 18,000 Lbs Two Post Lift W/ 2' Ext

Challenger Lifts
18,000 Lbs

Factory Shipped

Total Price:
$26,636.00 $18,370.00
(You save $8,266.00)
Free Shipping
Free Shipping

Factory Shipped

Challenger Lifts 18002 Heavy Duty 18,000 Lbs Two Post Lift W/ 2' Ext

When you need 2 post car lifts that can handle up to 18000 lbs., Challenger 18000 two post heavy duty lifts are a great choice. Perfect for servicing heavier fleet lines. The 18000 lb. truck lift is also available with 2' column height extensions for higher profile commercial trucks and vans.

All 18,000 lb. capacity hydraulic truck lifts come standard with Part# 10315 Stack Adapter Extension Kit, #10318 Four Frame Engaging Truck Adapters, #10317 Four Reducer Bushings for use with 10318. Frame engaging adapters (Part #10314 or 10318) are REQUIRED when lifting vehicles with frame construction such as trucks.

And with features like low profile arms, single point air actuated lock release, oversized steel pulleys, 60" lifting carriage, padded overhead cut-off bar, adapter accessories, etc., no other car lifts company gives you more.

Challenger Lifts 18002


Symmetric 2-post lift w/ single point air actuated lock release (14'6;" ht.)


  1. Single point air actuated lock release allows technician to disengage both columns simultaneously.
  2. Standard combinaton stack screw pads and storage brackets accommodates a wide range of vehicle pick up points.
  3. Oversized steel pulley reduces stress on equalization system and provides increased durability.
  4. Padded overhead shut off system prevents vehicle damage from being raised too high.
  5. 60" lifting carriage lessens column stress by dispersing load.


Model Number

Lift Capacity*

18,000 lbs. (8165kg)
A Rise Height1
85-1/2" (2172mm)
B Height Overall
14' 6"
16' 6"
C Width Overall
12' 10-3/4" (3931mm)
D Drive-Thru Clearance
106-3/4" (2711mm)
E Floor to Overhead Switch
13' 11"
15' 11"
F Arm Reach (Min)
38-1/2" (978mm)
G Arm Reach (Max)
62" (1575mm)
H Adj. Adapter Height2
6-1/4" / 8-1/2"
(159mm / 216mm)
I Adj. Adapter Height2
(with medium extensions)
10-1/4" / 12-1/2"
(260mm / 318mm)
J Adj. Adapter Height2
(with high extensions)
14-1/4" / 16-1/2"
(362mm / 419mm)
K Inside Columns
120" (3048mm)
Air Supply Required
85 - 115 psi
Voltage (Single Phase Standard)3
208v - 230v
Speed of Rise
80 seconds
Ceiling Height Required
14' 7"
16' 7"
Shipping Weight
3527 lbs. (1600 kg)
3610 lbs. (1637 kg)

*Lift capacity ratings are based on loads equally distributed on all four arms.  1 Rise Height is measured with high extension.  2 Medium and high auxiliary adapter extensions are standard.  Optional 3 phase electrical also available. Specify at time of order.
Standard lift colors are Red and Blue. Optional colors available.
Frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction.

Challenger Lifts 18002 Two Post Lifts
10314-24064.23.205.149.jpg          10318-1239-general-03953.23.205.149.jpg         b10264a-92182.1410924091.90.90.jpg           10317-03814.23.205.149.jpg
Part# 10314                    Part# 10318                        Part# B1064          Part# 10317

*Shipping is FREE to direct points within the 48-contiguous states.

***It is the buyer's responsibility to unload the freight at their location.

****The Challenger Lifts 18000 is an ALI Certified Lift. Click here to view its certification.

Challenger Lifts Warranty Agreement

Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc.,

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.

Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.

Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.


Description Model/Series Labor Functional Parts Structural parts Extended Warranty Available
CL10 CL10 1 Year 2 Years 5 Years Yes
10K 2-Post, 9K 2-Post LE10,  SA10,  CLFP9 1 Year 1 Year 5 Years No
12K, 15K, 18K 2-Post CL12, 15000, 18000 1 Year 2 Years 5 Years Yes
8K Inground EVW0820 1 Year 2 Years 2 years No
10K Ingrounds EV1020 1 Year 2 Years 5 Years Yes
12K, 15K Ingrounds EV1220, EV1520 1 Year 1 Year 5 Years Yes
14K 4-Post 4P14 1 Year 1 Year 5 Years No
15K 4-Post 4015 1 Year 2 Years 5 Years No
30K 4-Post Cable Drive 4030 1 Year 2 Years 5 Years No
30K, 40K, 60K Chain Drive 44030, 44040, 44060 1 Year 1 Year 1 Year No
Rolling Jacks RJ, SAJ 1 Year 1 Year 1 Year No
Mid and Short Rise MR-6, SRM-10 1 Year 1 Year 1 Year No
Scissors SX14, DX77 1 Year 1 Year 1 Year No
Mobiles CLHM 1 Year 1 Year 5 Years No
Accessories     90 days   No
Replacement Parts     90 days   No

Extended Warranty

An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.

Frequently Bought Together

Please choose options for all selected products

  • Choose Options