Free Shipping

Challenger Lifts 15000-3S Heavy Duty 15,000 Lbs Two Post Lift W/ 3-Stage Front And Rear Arms

$20,070.10
$20,070.10
$13,841.45
(You save $6,228.65 )
Brand:
SKU:
15000-3S
Condition:
New
Availability:
Factory Shipped
Shipping:
Free Shipping
Capacity:
15,000 Lbs
  • Challenger Lifts B10264A Air/Electric Workstation With Filter/Lubricat
  • Challenger Lifts 10317 Reducer Bushing Kit For Use With 10318 & 10314 Adapters
  • Challenger Lifts 10314 Frame Engaging Adapters For 2-Post Lifts
  • Challenger Lifts 10318 Frame Engaging Adapter Kit For 2-Post Lifts (Set Of 4)
  • Challenger Lifts 10333 Sprinter Adapter Kit For 15000-3S Series Only

Challenger Lifts 15000-3S Heavy Duty 15,000 Lbs Two Post Lift W/ 3-Stage Front And Rear Arms

Challenger’s new 15,000 lb. capacity heavy-duty cargo vehicle 2-post lift comes standard with 3-stage front and 3-stage rear arms. This new heavy-duty 2-post lift safely and properly reaches and accommodates any cargo van or transportation van/bus with step sides or lower profile ground effects.

Lift model 15000-3S and 15002-3S comes complete with all necessary adapters to lift vehicles and has optional adapters specific for certain cargo carrying vans. The standard pad adapters are 16% lower on our 15000-3S series than that of our traditional 15,000 lb. capacity 2-post.

Description

  • 15,000 lb. capacity heavy-duty Symmetric cargo vehicle 2-post lift comes standard with 3-stage front and 3-stage rear arms.

Features:

  1. 3-stage front and 3-stage rear arms provides extended reach and retraction making it easier to lift a wider variety of cargo carrying vans.
  2. Standard pad adapter is 16% lower than the standard 15,000 lb. capacity 2-post lift to accommodate lower profile cargo vans.
  3. Single point air actuated lock release allows technicians to disengage locks in both columns simultaneously.
  4. Oversized steel pulley reduces stress on equalization system and provides increased durability
  5. 60" lifting carriage helps to provide a more equal spread of weight which can prevent premature column wear.
  6. Padded overhead shut off system prevents vehicle damage should a vehicle come in contact with the overhead shutoff bar.

Specifications:

Model Number
15000-3S15002-3S

Lift Capacity*

15,000 lbs. (6804kg)
A Column Height
174" (4420mm)
198" (5029mm)
B Floor to Overhead Switch
167" (4242mm)
191" (4851mm)
C Rise Height1
84-1/4" (2089mm)
D Screw Pad Height
5-1/4" - 13-1/4" (133 - 337mm)
E Inside of Columns
120" (3048mm)
F Overall Width
154-3/4" (3931mm)
G Arm Extension
75" (1905mm)
H Arm Retraction2
36-5/8" (930mm)
Drive Thru Clearance
106-3/4" (2711mm)
Ceiling Height Required
175" (4445mm)
199" (5055mm)
Speed or Rise
80 Seconds
Air Supply Required
85 - 115 psi
Motor
2HP
Voltage (1 Phase)
208v - 230v

 15000 Two Post Lifts

Accessories:

Two post auto lift and inground lifts frame engaging truck adapters   Two post auto lift and inground lifts set of 4 framing engaging truck adapters      Part # 10317 - Reducer bushing for use with 10318 (set of 4)   

            10314                              10318                                   10317

Two post auto lift Sprinter Adapter Kit

            10333 

Challenger Lifts Warranty Agreement

Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.

Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.

Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.

Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ challengerlifts.com/register.shtml

Description Model/Series Labor Functional Parts Structural parts Extended Warranty Available
CL10 CL10 1 Year 2 Years 5 Years Yes
10K 2-Post, 9K 2-Post LE10,  SA10,  CLFP9 1 Year 1 Year 5 Years No
12K, 15K, 18K 2-Post CL12, 15000, 18000 1 Year 2 Years 5 Years Yes
8K Inground EVW0820 1 Year 2 Years 2 years No
10K Ingrounds EV1020 1 Year 2 Years 5 Years Yes
12K, 15K Ingrounds EV1220, EV1520 1 Year 1 Year 5 Years Yes
14K 4-Post 4P14 1 Year 1 Year 5 Years No
15K 4-Post 4015 1 Year 2 Years 5 Years No
30K 4-Post Cable Drive 4030 1 Year 2 Years 5 Years No
30K, 40K, 60K Chain Drive 44030, 44040, 44060 1 Year 1 Year 1 Year No
Rolling Jacks RJ, SAJ 1 Year 1 Year 1 Year No
Mid and Short Rise MR-6, SRM-10 1 Year 1 Year 1 Year No
Scissors SX14, DX77 1 Year 1 Year 1 Year No
Mobiles CLHM 1 Year 1 Year 5 Years No
Accessories     90 days   No
Replacement Parts     90 days   No


Extended Warranty

An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended warranty does not apply to accessories.