null

Quickjack QJ-5175359 5000TLX-110V Lift + Hangers + Pinch Weld Blocks Package

Brand:
Quickjack
SKU:
QJ-5175359

Factory Shipped.

Total Price:
$2,220.00 $1,850.00
(You save $370.00)
Free Shipping
Free Shipping

Factory Shipped.

Quickjack QJ-5175359 5000TLX-110V Lift + Hangers + Pinch Weld Blocks Package

QuickJack 5000TLX Extended-Length Portable Car Lift System

Description

5000TLX is an extended-length lift with jack support locations that extend 6 inches farther than our TL models. QuickJack is the best car lift for your home garage or shop, and with the additional reach of the EXT, you’ll service more vehicles than ever. Great for light-duty trucks and SUVs.

Why did we develop the 5000TLX? Simple: the 5000TL has a limiting lift point reach of 60". That works for most vehicles, but there are vehicles whose manufacturer-recommended lift points are just an inch or two out of reach. That sounds like a small difference, but professional shops and smart DIY'ers know never to take chances with an off-balance load.

The 5000TLX has a 66" lift point reach that's long enough for virtually every consumer vehicle type out there (with the exception of certain electric vehicles, for which we offer the 6000ELX). Many auto detailing and repair shops can’t fit a full-size car lift in their space, and there hasn’t been an industry response to meet these needs. We heard the community’s call and immediately went to work perfecting the TLX series. It's our pleasure to introduce the world’s first professional-grade home car lift. Of course, commercial garages will get just as much use out of it.

Looking to lift more weight with an extended-length frame? Check out the 7000TLX car lift.

Setup for the 5000TLX car lift is the same as it is for any other TL model. You still get 5,000 lbs. of lift, auto-locking safety bars, 30-second rise and one-touch button controls. Because we stretched our TLX models an extra 6" to accommodate some late-model cars, the overall frame length is also slightly longer. So, if you’re into Smart Cars or other super-short wheelbase vehicles, be sure to measure first—these frames are probably too long. For vehicles with jack points that are a little closer together, we recommend the 5000TL. However, the TLX will often accommodate shorter vehicles too. We ask that you measure your wheelbase(s), re-measure, and then measure again. Better safe than sorry.

EXTENDED-LENGTH car lift design

The 5000TLX portable car lift has been redesigned to accommodate vehicles with longer wheelbases. We’ve increased the overall frame length and lift point spread by 6". As a result, the minimum lift point spread is now 6" longer, as well. Our new portable car lift design better accommodates longer wheelbases and/or extended lift point spreads.

  • TLX minimum lift point spread: 43"
  • TLX maximum lift point spread: 66"
  • TLX overall frame length: 76"

Features

  • Automatic safety locks

Features dual-position automatic safety locks on each TL frame. As the frames rise, these locks glide securely into place at mid-rise and full-rise. Disengage with a simple flip of the lock bar and your car lift is ready for a smooth descent.

  • Increased lifting height

QuickJack TL models are capable of lifting an extra 3-inches making it easier to perform vehicle maintenance tasks that are both routine and more involved. The extra room gives you more ability and versatility under the vehicle, while doing so in added comfort.

  • One-handed operation

By holding the pendant control in one hand, your other hand is totally free. No cranking or bending during lifting.

  • Accessories to increase versatility

Most QuickJack accessories were developed from customer suggestion and need. We offer many different lifting options and configurations to customize your QuickJack experience to fit your needs and specifications.

 

 

 Lifting capacity

 Lowered height  Lifting height
 Lift point spread
 Frame dimensions  (ea.)  Other specs
 5,000 lbs. (2,268 kg)
 A Frame only: 3" (76  mm)
 D - With 2" block: 21" (   521  mm)
 I Maximum: 66" (1,676   mm)
 K Width: 11" (278 mm)
 Time to full rise: 30   seconds
 
 B With 2" block: 3.5"   (89  mm)
 E - With 3" block: 22"   (546  mm)
 J - Minimum: 43" (1,092  mm)
 L Length: 76" (1,930 mm)
 Power unit weight: 15   lbs. (7 kg)
   
 F Max. height: 24" (616   mm)
 
 A Height (lowered): 3" (76 mm)
 Shipping dimensions   (ea. frame):
 79.5" (L) x 15.25" (W) x   5" (H)(2,015 mm x 385   mm x 129 mm)
   
 G - With adapters: 24"   (597 
 mm)
 
 Weight: 81.5 lbs. (37 kg)
 Shipping weight: 250 lbs   (113 kg)
   
 H With adapters +   pin: 26.75" (673 mm)
     

What's inside?

  • 5000TLX Left Frame Assembly
  • 5000TLX Right Frame Assembly
  • 1x Hydraulic power unit with control
  • 4x Medium rubber lift blocks (2")
  • 4x Tall rubber lift blocks (3")
  • 2x Short hydraulic hoses
  • 2x Long hydraulic hoses
  • 2x Frame-positioning handles
  • Fittings and thread tape for setup
  • Instruction manual

Requirements

  • Up to 3 liters of Automatic Transmission Fluid
  • Air source to inflate air cylinders up to 50 PSI
  • Assembly tools

QuickJack Wall Hangers Set

Description

These sleek, black powder-coated wall mounts are the only official hangers designed and engineered by QuickJack. They're guaranteed to safely hold all QuickJack frames when mounted directly into a wall stud. Sold in sets of two.

There are dozens of ways to stow your QuickJack in a garage: lean them against the wall; stack them on top of each other; tuck them together under your vehicle, etc. The opportunities for easy storage are practically endless. Some people prefer to hang their frames on the wall, up and out of the way. These convenient wall hangers are the best way to make that happen.

If you'd like to hang your portable car lift frames on the wall of your garage, our exclusive hangers mount directly into a sturdy wall stud for safe, simple storage. We recommend installing these wall hangers at the same height and high enough so that the frames rest on the floor. This makes it much easier to lift and hang the frames onto the hooks of the wall hangers.

Each mount features a sleek, laser-cut QuickJack logo to provide visible proof that this is the OFFICIAL QuickJack wall mount set. These wall hangers were designed and engineered by the same minds that designed your QuickJack portable car lift, so you know rigorous testing standards were applied and unparalleled safety factors were built in. Real-world testing and advanced computer analysis were performed to ensure quality and long-term resilience.

Now in a matte black powder-coat finish

We made our wall hangers just as sleek as your QuickJack. They now ship with a very durable (yes, we tested) black powder coat finish that matches your QuickJack frames for an even better look in your garage!

We know you'll be impressed by how durable your hangers are. Plus, they look great in any garage environment. If you've been looking for a way to vertically suspend your QuickJack frames, these hangers offer the perfect solution.

Features

  • Sold in sets of two
  • Now in powder-coated black!
  • One size fits all QuickJack models
  • Over-engineered to 150% rated capacity
  • Solid-steel construction
  • Sleek, laser-cut QuickJack logo design
  • Designed and engineered by QuickJack

 

QuickJack wall hangers specifications diagram    
 A - Width: 4.75" (121   mm)
 B Height: 6.75" (172   mm)
 C Depth: 2.25" (57   mm)
 Weight (ea.): 1 lbs.   (0.5 kg)
 Shipping weight: 3   lbs. (1.4 kg)

What's inside?

  • Two (2) QuickJack wall hangers
  • Hardware for mounting

Quickjack Pinch-Weld Blocks

Description

Urethane rubber block with pinch-weld design is perfect for vehicles with pinch weld frames. The harder rubber offers extra support for pinch weld vehicle types. These blocks fit with all QuickJack frame assemblies. Sold in sets of four.

Supporting cars on pinch-weld rails creates excessive pressure points which can gouge or tear the standard rubber blocks and damage delicate body rails on unibody vehicles. QuickJack's urethane rubber pinch-weld blocks were engineered with a cross-cut slotted design, allowing you to position them lengthwise or crosswise. They’re the perfect body cradling tool to safely support rocker panels or sheet metal body rails, especially pinch-weld rails that have degraded over time due to corrosion from grime and road salt.

Ensure a longer lifespan for your lift blocks with QuickJack's specially designed pinch-weld jack pads. These blocks are taller than our standard rubber blocks and can be placed independently in the lift block trays. They can also be stacked by placing a pinch-weld block on top of a small standard block. (The pinch-weld and tall standard blocks should not be stacked.) Stop using wood blocks, hockey pucks and towels that can slip or tear, resulting in vehicle damage, or worse, unstable lifting. Durable urethane rubber is impermeable to oil, grease and gas and will last for many years of simple, maintenance-free lifting.

Features

  • Specially formulated urethane rubber
  • Bilateral deep slots accommodate virtually all pinch weld frames
  • Position lengthwise or crosswise
  • Water/Chemical resistant and 100% weatherproof
  • Single-piece construction for superior hold
  • Sold in sets of 4
Pinch-weld block spec diagram         
 A - Length: 4" (102   mm)
 B - Width: 3" (76 mm)
 C - Height: 3" (76 mm)
 D - Pinch-weld             width: 0.4" (10 mm)
 E - Pinch-weld     depth: 0.5" (13 mm)

 

WARNING CA Proposition 65 Message:

 

 

                 

Download

Wall Hangers Sales Flyer

Pinch Weld Blocks Sales Flyer

Catalog

Standard Warranty

Duration: From the date of purchase by the original Purchaser or 12 months from the date of shipment or whichever comes first.

  • One-Year (12-Month) Warranty on equipment structure*
  • One-Year (12-Month) Warranty on operating components
  • One-Year (12-Month) Free Shipping** on ground-freight charges related to warranty performance

Optional Extended Warranty

Duration: From the date of purchase by the original Purchaser or 24 months from the date of shipment or whichever comes first.

  • Two-Year (24-month) Warranty on equipment structure*
  • Two-Year (24-Month) Warranty on operating components
  • Two-Year (24-Month) Free Shipping** on ground-freight charges related to warranty performance

Limited Warranty

  1. Who gives this warranty (Warrantor): QuickJack, 1645 Lemonwood Dr., Santa Paula, CA 93060
  2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
  3. What products are covered by this warranty: QuickJack portable lift system
  4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
  5. What is not covered under this warranty:
    1. Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
    2. Any damage caused by using equipment beyond rated capacity and/or capability
    3. Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
    4. Items considered general wear parts such as rubber or plastic pads/protectors, worn casters/wheels, plastic trays, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
    5. Any component damaged in shipment or any failure caused by installing or operating equipment under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
    6. Any component failure caused by rain, excessive humidity, corrosive environments or other contaminants
    7. Rusted components due to improper maintenance or corrosive environments
    8. Cosmetic defects that do not interfere with product functionality
    9. Damage due to incorrect voltage or improper wiring
    10. Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of a QuickJack product
    11. All electrical components are guaranteed for one year (12 months) against defects in workmanship and/or materials when the lift is installed and used according to specifications
  6. Responsibilities of Warrantor under this warranty: Repair or replace with either new or reconditioned unit at Warrantor’s option, component and/or unit which is defective, has malfunctioned and/or failed to conform within duration of the warranty period.
  7. Responsibilities of Purchaser under this warranty:
    1. Provide dated proof of purchase and maintenance records
    2. In some cases, components may be required to be shipped to the nearest QuickJack Authorized Service Center. Freight costs, after 12 months, must be borne by the Purchaser.
    3. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
  8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.

*Equipment structure is defined as any non-moving permanently affixed frame or main body, or sub-structures that are non-moving and permanently affixed or attached to any main equipment structure or frame. **Free-shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote addresses.

Limitation of Liability

QuickJack shall have no obligation pursuant to this Warranty with respect to products which in our sole judgment have been altered damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer or any other person other than an authorized representative of QuickJack has made any attempt to service or modify the tool prior to its return to QuickJack under this Warranty. In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages QuickJack products are provided and sold as is without any express or implied warranties including warranties of merchantability or fitness for particular purpose. No warranties, expressed or implied, will apply after this period. QuickJack may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on www.quickjack.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.

Frequently Bought Together

Please choose options for all selected products