Dannmar Alignment Turnplate Set (Set of 2)
Caster, camber, toe, pulls left, pulls right, uneven tire wear. If you live by these terms, Dannmar speaks your language. And when you’re performing a wheel alignment, everything has to be correct. The vehicle’s suspension, steering components, and even the car’s tire pressure all need to be to spec. And equally, your equipment has to be able to perform well. Dannmar’s superior-design and aluminum turnplates are hardier and more accurate than ever before. Features include new engineering upgrades and additional underside rollers, compared to previous designs. These advanced designs are one more reason to choose Dannmar for easy-to-use and spot-on wheel alignments.
Precisely Correct
At Dannmar we know that when you perform a wheel alignment, you want to be sure that after the vehicle leaves it’s not going to be a comeback. Dannmar’s Deluxe Turnplates for alignment lifts provide excellent accuracy by blending superior design, technology, and high-quality components into one unit.
Dannmar’s Turnplate Set measures a variety of wheel angles with free-floating wheel alignment turnplates. The aluminum-alloy set incorporates a polished stainless steel bearing surface and oversized upper radius plate to provide accuracy. Literally hundreds of smooth-polished, Delrin balls provide a low coefficient of friction and precision movement under all conditions. And Dannmar has significantly increased the size and number of rollers under the turnplate. This enables more controlled roll-backs and the plate stays stable even if the vehicle is moved onto the plate slightly off-center. As work is performed the alignment readings remain accurate.
Angled steel lock pins
Dannmar’s turnplates are built for busy day-to-day work and incorporate two locking pins that secure the turnplate during alignment and parking procedures. Dannmar's engineering makes it possible to engage the pins any time you need to roll the tires over the turnplates.
Dual "popsicle stick" gap stops
Two sturdy-rubber “popsicle sticks” fit exactly between the turnplate and the runway. This provides for a perfectly level, gap-free surface. Gap stops make it easier to move a vehicle across the turnplate without disrupting the alignment. When using the lift as a parking or service lift, it’s possible to move vehicles forward and rearward with more ease.
Features
- Aluminum alloy and stainless steel construction
- Robust, industrial-grade design
- Heavy-duty encapsulated Delrin bearings provide increased support and movement
- Stable tri-channel ball retainers provide better performance, minimize service and maintenance
- Free-floating 360° movement in all directions
- 2” movement in any direction from center point
- Includes two hardened rubber “popsicle stick” rollback bridges that eliminate the gap between the turn plates and lift runways for a smooth transition during rollback procedures
- Oversized 14” diameter gauge accommodates all wheel types
- Synthetic polymer underside slider allows for easy movement of turn plates along runways surfaces
- Auto-centering design
- Greaseless operation. No maintenance or mess.
- Dual angled locking pins
Specs
Fits | D4-12A |
SKU# | 5700385 |
Base Dimensions | 18.5” (470 mm) x 18.5” (470 mm) |
Rotation | 360 degrees |
Overall Height (w/o Pins) | 2” (50 mm) |
Downloads
SPECS SHEET
Duration: From the date of purchase by original Purchaser or 36-months months from the date of shipment by Dannmar or whichever comes first.
Three Years (36-Months) Warranty on the lift structure [*] [**]
One Year (12-Months) Warranty on the hydraulic cylinder(s) and power unit [*] [**]
One Year (12-Months) Warranty on operating components [*] [**]
One Year (12-Months) Warranty on electrical components (excluding power unit) [*] [**]
Limited Warranty
1. Who gives this warranty (Warrantor): Dannmar, 1645 Lemonwood Dr., Santa Paula, CA 93060
2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
3. What products are covered by this warranty (Product): Any Dannmar Two-Post or Four-Post Vehicle Service Lift**
4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
5. What is not covered under this warranty:
a. Freight and shipping charges related to warranty performance.
b. Onsite labor or factory labor associated with warranty performance.
c. Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service Product in accordance with
instructions provided in the owner’s manual(s) supplied.
d. Any damage caused by overloading Product beyond rated capacity.
e. Items or service normally required to maintain the Product, i.e. lubricants, oil, etc.
f. Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of
manufacturer defect due to material and/or workmanship.
g. Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with
installation and operation guidelines or damaged by contact with tools or surroundings.
h. Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants.
i. Rusted components due to improper maintenance or corrosive environments.
j. Cosmetic defects that do not interfere with Product functionality.
k. Damage due to incorrect voltage or improper wiring.
l. Any failure that results from improper installation or use not according to specifications.
m. Damage caused by disasters such as fire, flood, wind, and lightning.
n. Damage caused by unauthorized attachments or modifications.
6. Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor's option, component which is defective, has
malfunctioned and/or failed to conform within duration of the warranty period. Warrantor will pay reasonable labor costs for the first 12
months only.
7. Responsibilities of Purchaser under this warranty/ notice of claims:
a. Provide dated proof of purchase and maintenance records.
b. In some cases, components may be required to be shipped to the nearest Dannmar Authorized Service Center. Freight costs, after
12-months, must be borne by the Purchaser.
c. Use reasonable care in the operation and maintenance of the Products as described in the owner's manual(s).
d. Immediately upon receipt of the Product, Purchaser shall inspect the same. Any claim for shortage must be made within ten days
after Purchaser's receipt. All other claims, including claims for alleged defective Product, must be made within fifteen days after
Purchaser learns of the facts upon which such claim is based, but in no event later than the applicable one, two or five year period
specified above for the specified component(s). All claims not made in writing and received by Seller within the time periods
specified above shall be deemed waived. With respect to any defects incapable of discovery until in use, all claims for any
damages or losses as a result of such defects shall be deemed waived unless made in writing and received by Seller within fifteen
days after Purchaser learns of the alleged defect giving rise to the claim and after the expiration of said periods, but in no event
later than the applicable one, two or five year period specified above for the specified component(s). Purchaser expressly
assumes all liability for all such damages or losses, irrespective of any use which shall have taken place or whether the alleged
defect shall have occurred or been discovered prior to expiration of such periods.
8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according
to the normal work flow at the servicing location, and depending on the availability of replacement parts.
9. *As determined by Warrantor in its sole discretion**For all Dannmar brand Two-Post or Four-Post Vehicle Service Lifts (excluding specialty
lifts, high rise, commercial parking, material handling, or models for particular purpose) manufactured on or following 6/1/2020.
Frequently Bought Together
Please choose options for all selected products