Bendpak APX-TP3 Two Post Accessory Pack


Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.

Total Price:
$678.00 $565.00
(You save $113.00)
Free Shipping
Free Shipping

Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.

jmc-shipping-button.pngBendpak APX-TP3 Two Post Accessory Pack

Accessory Pack includes: (1) 5215761 Frame Cradle Pads 60 mm + (1) 5215848 Wide Frame Cradle Pads + (1) 5215759 Tall Adapters Set 5.5" (125 mm) Height / 60 mm Pin / SET OF 4


Bendpak 60mm Pin Frame Cradle Pads for 2 Post Lift Model 2016 And Up (Set of 4)

Frame Cradle Pads / 60 mm Pin / SET OF 4 (5215761)

If you've got a heavy vehicle to lift, especially a truck, then you're going to want a set of these BendPak Frame Cradle Pads. Sturdy steel construction keeps the frame firmly between the lips, while the treaded rubber mats protect the finish and reduce the chance of slippage.

Anyone who has ever lifted a full-bed truck onto a two-post knows what a dicey procedure it can be. Reduce your risk with these handy Frame Cradle Pads from BendPak. Clamp-like design gives the vehicle nowhere to go except up and over when you decide. And the sticky-mat holds onto the frame and keeps it there, without scratching the hardware



  • Perfect for use with any BendPak 2-Post Lift
  • Sturdy steel construction
  • Tactile rubber mat reduces slippage and protects finish
    *Suitable for New Bendpak lift models ( after the year 2016) such as: XPR-10AS, 12CL Etc 



Bendpak Wide Frame Cradle Pad 60mm Pin

2-Post Frame Cradle Pad / 60 mm Pin / Fits Wide Frames / SET OF 2 (5215848)

BendPak’s wide frame cradle pads are a necessity for any lifting of heavy-duty commercial-grade trucks on a two-post lift. Since this frame cradle pad is an ALI Certified two-post lift accessory, you’ll feel comfortable knowing it’s been overdesigned to handle heavy-duty projects. Attaching easily to the arms of any BendPak two-post lift, the frame cradle pads straddle your vehicles chassis frame, holding it firmly in place to prevent movement. These wide frame cradle pads handle chassis frames up to 5.25 inches width, and only a set of two should be necessary in the front where the frame sections converge.

While the frame cradle pads secure your frame, the polyurethane rubber pad protects from any damage to your hardware and further reduces any chance of movement. These pads have a textured surface which provides that extra grip for additional stability, and its thick rubber construction takes on heavy abuse.



  • Installs easily to BendPak two-post lift arms 
  • Sturdy steel construction
  • Tactile rubber pad reduces slippage and protects finish
  • Fits wide frames up to 5.25”
  • Made for heavy-duty commercial-grade trucks



BendPak 2-Post Tall Adapter 5.5” (125 mm) Height, 60 mm Pin (Set of 4)

2-Post Tall Adapter / 5.5" (125 mm) Height / 60 mm Pin / SET OF 4 (5215759)

Adapter Pins are great for altering the height of your two-post lift to reach even the most difficult lifting points on your vehicle. When combined with other two-post lift accessories, Adapter Pins help customize your lift height to fit your specific needs.

With sizes of low (2"), medium (2.75") and tall (5.5"), Adapter Pins provide your lift with a broad range of heights to choose from. The Tall Adapter Pin has a 35 mm or 60 mm diameter pin that drops easily into most two-post lift arms, instantly extending the height of your lift. This makes it ideal for vehicles with an uneven underbody, and gives your two-post lift the power to lift any vehicle safely and easily. Adapter Pins can also be combined with any BendPak accessory with a 60 mm pin, like a Screw Lift Pad, giving you an endless range of customization. Tall Adapter Pins extend the height of your lift pad by 5.5" helping you find the right height for each job. The Adapter Pins’ sturdy construction can handle any project in your garage, and provides you with the power and versatility to adapt to any situation.

Not all jobs, and not all cars are the same. Accessories like Adapter Pins are designed to adapt your two-post lift for any project your garage throws at you. Designed to work with most BendPak accessories, Adapter Pins provide you with the customization you need to get your two-post lift working for you! With a multitude of uses and heights, Adapter Pins are a must-have accessory for any tech working on a variety of projects. 



  • Tall adapter for BendPak two-post lifts
  • 60 mm pin
  • Fits screw-pad assembly
  • Sold in sets of four


**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.

Frequently Bought Together

Please choose options for all selected products