BendPak XPR-10XLS-LP-181 10K Cap. / Symmetric / Adjustable Width / Screw Pads / HIGH RISE / 181" O.A. Height / LOW-PRO ARMS


Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.

Total Price:
$7,152.00 $5,960.00
(You save $1,192.00)
Free Shipping
Free Shipping

Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.

jmc-shipping-button.pngBendPak XPR-10XLS-LP-181 10K Cap. / Symmetric / Adjustable Width / Screw Pads / HIGH RISE / 181" O.A. Height / LOW-PRO ARMS

Tall techs no longer have to strain themselves while they work. The XPR-10XLS is a high-reach symmetrical two-post lift that can be customized with an optional extension kit and/or Low-Pro™ arms. Perfect for vehicles of all sizes. A must-have tool to help taller techs stand upright while they work.

With BendPak's 10,000-lb. capacity XPR-10XLS symmetrical two-post lift in your shop, most cars, trucks and SUVs will be raised quickly and effortlessly. Fully ALI Certified, this model features an extra-high lifting carriage. The taller carriage offers an extra 6" of lift, which means vehicles can be raised a full 75" (about 80" with adapters). Taller mechanics will enjoy this feature, since it means they no longer have to bend, stoop, strain and even injure themselves while they spend hour after hour working underneath lifted vehicles. There's no car lift quite like the XPR-10XLS. This is the symmetrical version (an asymmetrical version is also available), and it's ideal for shops and operators that deal mainly with vehicles whose centers of gravity are toward the center of the car. Of course, trucks and SUVs can be used with this model as well. Some prefer asymmetrical lifts because they allow a little more door clearance, while other prefer vehicles to be positions as close to the center of the lift as possible. There's no right or wrong—the choice is yours!

Choose Low-Pro™ arms
BendPak's exclusive Low-Pro arms are perfect for low ground-clearance cars, trucks and SUVS. The arms aren't actually lower to the ground, but when they telescope outward, the top of the arm channels remain closer to ground level. The design of the XPR-XLS-LP helps prevent damage that might otherwise occur to vehicle side skirts and/or undercarriages.

Choose extended-height
Thanks to a bolt-on extension, the XPR-10XLS-181 offers 181" of overhead clearance while maintaining the lift's safety and structural integrity. This effectively places your two-post lift among the tallest and most efficient models ever built. The XPR-XLS already features a taller lift carriage, and this extended-height variant improves on that by offering increased room for vehicles above—in addition to that room for taller techs working below.

Choose low-profile AND extended-height
With the increased lift carriage height of the XLS, tall mechanics have an easier time working underneath. Add the Low-Pro arms, and low-stance cars are easily accommodated. Also include the bolt-on extension kit, and there's nothing too tall for this lift. The XPR-XLS-LP-181 two-post lift is by far the most versatile variant of this lift, and it's a must-have option for every busy auto shop nationwide


  • Lift arms shown with optional foot guards
  • 10,000-lb. lifting capacity
  • Expandable top beam accommodates wide or narrow
  • configuration
  • Double-telescoping screw pads offer increased versatility
  • Padded overhead safety shutoff bar
  • Single-piece columns
  • Dual hydraulic direct drive cylinders
  • Automatic arm restraints
  • Lowered arm tube supports 
  • Maintenance-free UHMW load bearings
  • Oversized 59" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Single-point safety release 
  • Safety locks in each column spaced every 3" 
  • Automatic overhead shutoff
  • Plated arm restraints and arm pins for rust prevention 
  • Heavy-duty 1/2" aircraft
  • quality equalizer cables 
  • Oversized cable sheave diameter reduces cable fatigue 
  • 4-piece 63 mm stackable adapter set comes standard 
  • ALI Certified


 Lifting Capacity*  10.000 lbs. (4536 kg)
 *Max Capacity / Front Axle  5000 lbs. (2268 kg)
 *Max Capacity / Rear Axle  5000 lbs. (2268 kg)
 A - Rise:  75" (1905 mm)
 B - Rise + Pad Only:  79,75" (2026 mm)
 C - Rise + Pad + 63 mm Adapter:  82,25" (2089 mm)
 D - Min. Height + Pad:  4,75" (121 mm)
 Time to Full Rise:  50 seconds
 Outside Dimensions  
 E - Height Overall:  157" (3988 mm)
 F - Width Overall:  132" (3353 mm) or 145" (3683 mm)
 G - Outside Columns:  126,75" (3219 mm) or 139,75" (3550 mm)
 Inside Dimensions 
 H - Inside Columns:  105,5" (2680 mm) or 118,5" (3010 mm)
 I - Drive-Thru Clearance:  93" (2362 mm) or 106" (2692 mm)
 J - Floor To Overhead Switch:  147" (3734 mm)
 Arms & Pads 
 K - Front Arm Reach: (MIN)  25,5" (648 mm)
 K - Front Arm Reach: (MAX)  49,5" (1257 mm)
 L - Rear Arm Reach: (MIN)  32,25" (819 mm)
 L - Rear Arm Reach: (MAX)  52,5" (1334 mm)
 Screw Pad Adjustment:  2" (51 mm)
 Max Load Per Arm  2500 lbs. (1134 kg)
 Power Unit  
 Motor:  220 VAC / 60 Hz / 1 Ph
 Noise:  45 dB
 Weight:  1,778-lbs. (806.5 kg)
 Dimensions:  162'' x 24'' x 32'' (4,114 mm x 609 mm x 812 mm)



Specs Sheet


**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.

Frequently Bought Together

Please choose options for all selected products

  • Choose Options