Bendpak XPR-10S 10,000 Lb Symmetric Clear Floor Two Post

Bendpak XPR-10S 10,000 Lb Symmetric Clear Floor Two Post Lift

• The XPR-10S two-post lift offers exceptional direct-drive lifting performance. This industrial-strength car lift guarantees cutting-edge technology, top of the line materials, a design that’s ahead of its time and a 10,000-lb. lifting capacity. All height/width variations fit in shops with ceilings higher than 12’, and none of them will crowd your floor while you work beneath a vehicle. Every XPR-10S two-post lift features our telescoping screw pad assembly kit

XPR-10S lifts include:

• Direct-drive performance
• Adjustable top beam for wide or narrow installation
• Top-quality construction and materials, incorporating the latest technology
• Double-telescoping polyurethane screw pads that are tear and gouge-resistant, reducing operating costs and improving safet.
• A set of 63 mm stacking adapters is provided with every XPR-10S lift as standard accessories.

XPR-10S Characteristics:

• Lift Capacity: 10,000 lbs.
• Height: 145”
• Width: 132” (narrow config), 145” (wide config)
• Lift height: 69”
• Type: Clear Floor

Features:

• 10,000?lb. lifting capacity
• Expandable top beam accommodates wide or narrow drive-thru configuration
• Double telescoping screw pads offer increased versatility
• Padded overhead safety shutoff bar
• Telescoping arm design for more versatile arm positioning
• Single piece columns
• Single point safety release
• Drop-end arms provide a lower pad height
• Dual hydraulic direct drive cylinders
• Oversized 53" tall carriage for superior strength and durability
• Electric / hydraulic power system
• Large, 17" x 19" A36 steel base plate
• Self-lubricating dura glide UHMW polyethylene bearing system
• Safety locks in each column spaced every 3"
• Plated arm restraints and arm pins for rust prevention
• Heavy-duty 1/2" aircraft quality equalizer cables
• Oversized cable sheave diameter reduces cable fatigue
• 4?piece 63 mm stackable adapter set comes standard
• Triple telescoping front arms
• ETL Approved

Specifications

Capacity

• Lifting Capacity* 10,000 lbs. (4,536 kg)
• *Max Capacity / Front Axle 5,000 lbs. (2,268 kg)
• *Max Capacity / Rear Axle 5,000 lbs. (2,268 kg)

Rise

• A - Rise: 69" (1,753 mm)
• B - Rise + Pad Only: 75" (1,905 mm)
• C - Rise + Pad + 63 mm Adapter: 77.5" (1,969 mm)
• D - Min. Height + Pad: 6.75" (171 mm)
• Time to Full Rise: 45

Outside Dimensions

• E - Height Overall: 145" (3,683 mm)
• F - Width Overall: 132" (3,353 mm) or 145" (3,683 mm)
• G - Outside Columns: 126.75" (3,219 mm) or 139.75" (3,550 mm)

Inside Dimensions

• H - Inside Columns: 105.5" (2,680 mm) or 118.5" (3,010 mm)
• I - Drive-Thru Clearance: 93" (2,362 mm) or 106" (2,692 mm)
• J - Floor To Overhead Switch: 141" (3,581 mm)

Arms & Pads

• K - Front Arm Reach: (MIN) 27.5" (699 mm)
• K - Front Arm Reach: (MAX) 51.5" (1,308 mm)
• L - Rear Arm Reach: (MIN) 34" (864 mm)
• L - Rear Arm Reach: (MAX) 54.5" (1,384 mm)
• Screw Pad Adjustment: 2" (51 mm)
• Max Load Per Arm: 2,500 lbs. (1,134 kg)

Power Unit

• Motor: 220 VAC / 60 Hz / 1 Ph
• Noise: 45 db

Optional Telescoping Low-Pro arms

The safe and rugged XPR-10-LP two-post lift features our exclusive Low-Pro arms that accommodate lowered sports cars and those vehicles with exclusive lift points located on the extreme outer edges of the chassis.

Note: The Low-Pro Arms is NOT True Symmetric  (Click here to see info on the Bendspak XPR-10S-LP Low Profile Two Post Lift)

Download the Bendpak Warranty Document