Bendpak XR-12000A Quatra 12,000 Lbs Extended Alignment Lift


Factory Shipped.

Total Price:
$23,195.00 $19,410.00
(You save $3,785.00)
Free Shipping
Free Shipping

Factory Shipped.

Bendpak XR-12000A Quatra 12,000-Lb. Capacity Extended Alignment Lift

Quatra series lifts by BendPak is the next evolution in industrial strength lifting technology. 12,000-pounds of true vertical lifting power for a more compact footprint to better accommodate smaller service bays and work areas. At the same time, the unique quad-opposing scissors design eliminates restrictive arm structures found on other scissors, giving the technician an unprecedented freedom of movement beneath the lift. The XR-12000A provides you full, unobstructed vehicle access and effortless workspace entry and exit. More space means more freedom and efficiency than you thought possible beneath a car lift.

Click here to see our full description

Bendpak Safe Balancing   Bendpak Car Lift Guide

Key Features 

  • 12,000-lb. lifting capacity
  • Extended runway design for greater vehicle capacity
  • Integrated recessed full-floating front radius plates and over-sized rear slip-plates
  • Turn plate pockets feature adjustable leveling bolts for infinite turn plate leveling
  • Durable powder-coat finish that can withstand harsh environments and chemical spills and will provide years of protection
  • Extendable, hinged, collapsible, and stowable approach ramps
  • Multi-position runway work steps
  • Non-skid runways provide sure grip for vehicles and technicians
  • Dependable electric/hydraulic power system
  • Cylinders feature integrated velocity fuses to control sudden descent
  • Power console features simple operator controls
  • Open front design with clear center, sides and rear
  • Multi-position automatic leveling system
  • Quad automatic safety locks with pneumatic push-button release
  • Collapsible front tire stops clear for low vehicle skirts and alignment instrumentation
  • Lubricated-for-life bearings on all pivot points
  • Rugged steel legs and formed steel runways
  • Turned, ground, polished and hardened zinc- plated axle pins
  • Grease nipples on all moving pins and bearings
  • High-efficiency hydraulic power unit provides faster raising and descent times
  • Easy access to hydraulic/electrical components for simple routine servicing
  • Easy-to-use and understand operator controls
  • Power unit console with easy access front panel
  • Can be flush-mounted or recessed

Optional Equipment

Optional 6,000-pound capacity rolling jacks (model RJ-6) make a great addition to increase service capacity. Each jack has telescoping arms and frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump requiring a maximum pressure of 125 PSI and 10-20 CFM.
An integrated rolling bridge airline kit is available that installs neatly within the runway to create a more tidy hose routing solution for single or dual

jack purpose.

The XR-12000A is equipped with an intelligent hydraulic regulating manifold featuring four, two-position ball valves to balance hydraulic pressure accurately between the master and slave cylinders for precise, equalized lifting of the runways. The manifold valve assembly is located at the power console with removable cover for simple routine maintenance and adjustment.





  • Lifting Capacity*:12,000 lbs. (5,443 kg)
  • *Max Capacity / Front Axle: 6,000 lbs. (2,722 kg)
  • *Max Capacity / Rear Axle: 6,000 lbs. (2,722 kg)


  • A - Min. Runway Height: 11.25" (286 mm)
  • B - Max. Rise: 75.25" (1,911 mm)
  • C - Overall Width: 89.5” (2,274 mm)
  • D - Length / Ramps Extended: 300.25” (7,626 mm)
  • D - Length / Ramps Collapsed: 283.25” (7,201 mm)
  • D - Length / Ramps Stowed: 250” (6,350 mm)
  • E - Runway Width: 23.75” (604 mm)
  • F - Width Between Runways: 40.5” (1,029 mm)
  • G - Length of Runways: 219.5” (5,575 mm)
  • H - Min. 4-Wheel Alignment: 87” (2,210 mm)
  • I - Max. 4-Wheel Alignment: 160” (4,064 mm)
  • J - Max. 2-Wheel Alignment: 194” (4,928 mm)
  • K - General Service Wheelbase: 199” (5,055 mm)

 Minimum Wheelbase

  • Rated Capacity: 155" (3,937 mm)
  • 75% Capacity: 135" (3,429 mm)
  • 50% Capacity: 110" (2,794 mm)
  • 25% Capacity: 90" (2,286 mm)


  • Locking Positions: 14

 Power Unit

  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Noise: 45 dB



Bendpak DP-30     Bendpak Rolling Jack 6000     Bendpak Airline Kit
         DP-30                            ROLLING JACKS                AIRLINE KIT

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to function. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

*Shipping is FREE to direct points within the 48-contiguous states.

**Bendpak charges taxes to California**

BendPak X-Rack Scissors Lifts are warranted for 18 months on equipment structure, to be free of defects in material and workmanship. Power units, hydraulic cylinders, and all other assembly components such as turnplates, slip plates, valves, switches etc. are warranted for one year against defects in material or workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

Bendpak 5-2-1 Warranty

Frequently Bought Together

Please choose options for all selected products

  • Choose Options