BendPak XPR-18CL 18,000 Lb. Capacity 2 Post Car Lift
18,000-lb. Capacity / Two-Post Lift / Clearfloor / Standard Arms
Shops that work on massive fleets and vehicles need a powerful car lift with a small footprint, so only BendPak’s 18,000-lb. capacity XPR-18CL will get the job done safely and efficiently. It offers the most lifting capacity of any two-post lift we make, which means you get the best column, carriage and frame component construction we offer.
With an XPR-18CL two-post car lift, you will service an incredibly diverse array of vehicles. High-capacity twopost lifts are commonly known as “all-service” lifts. Given their versatility, they’re the most common lift type found in professional shops. And, because they’re going to be in so many shops, it’s important that the XPR-18CL can lift any vehicle that falls well under the max weight capacity. This means the telescoping arms will adjust to fit under race cars and other low ground-clearance vehicles.
In addition to smaller cars and light trucks, it will also lift oversized equipment: trailers, farming equipment, commercial trucks, etc. The columns are built wide enough to accommodate just about any vehicle up to 18,000 lbs., making the XPR-18CL ideal for service shops that want to be prepared for the anything. The only way to get more lifting power from a BendPak lift is to move into four-post lift territory. However, for a smaller footprint, extreme power and majestic durability and safety, you can’t do better than the BendPak XPR-18CL.
Features
- 18,000-lb. lifting capacity.
- Padded overhead safety shutoff bar.
- Extended height top-beam provides greater overhead clearance.
- Single-point safety release.
- Dual direct-drive hydraulic cylinders.
- Dual-synchro equalization system for equal lifting.
- Oversized 53" tall carriage for superior strength and durability.
- Electric / hydraulic power system.
- Oversized A36 steel base plates.
- Self-lubricating dura-glide UHMW polyethylene bearing system.
- Safety locks in each column spaced every 3".
- Plated arm restraints and arm pins for rust prevention.
- Heavy-duty 1/2" aircraft-quality equalizer cables.
- Oversized cable sheave diameter reduces cable fatigue.
- Durable, rubber lift pads with stackable adapters.
- Multi-piece adapter set includes four 6" stackable adapters, four 3" stackable adapters, four polyurethane contact pads and four frame cradle pads. Ideal for trucks and vans with running boards or auxiliary fuel tanks.
- Convenient storage is included for truck and van adapters.
- Versatile drop-in contact pads with stackable adapters.
Specifications
| Lifting Capacity | 18,000 lbs. (8,165 kg) |
| *Max Capacity / Front Axle | 9,000 lbs. (4,082 kg) |
| *Max Capacity / Rear Axle | 9,000 lbs. (4,082 kg) |
| A - Rise | 69" (1,753 mm) |
| B - Rise + Pad Only | 74" (1,880 mm) |
| C - Rise + Pad + 63 mm Adapter | 80" (2,032 mm) |
| D - Min. Height + Pad | 5" (127 mm) |
| E - Height Overall | 170" (4,318 mm) |
| F - Width Overall | 155" (3,937 mm) |
| G - Outside Columns | 144" (3,658 mm) |
| H - Inside Columns | 120" (3,048 mm) |
| I - Drive-Thru Clearance | 106" (2,692 mm) |
| J - Floor To Overhead Switch | 165" (4,191 mm) |
| K - Front Arm Reach: (MIN) | 39" (991 mm) |
| K - Front Arm Reach: (MAX) | 60" (1,524 mm) |
| L - Rear Arm Reach: (MIN) | 39" (991 mm) |
| L - Rear Arm Reach: (MAX) | 60" (1,524 mm) |
| Max Load Per Arm | 4,500 lbs. (2,041 kg) |
| Motor | 220 VAC / 60 Hz / 1 Ph |
| Noise | 45 dB |
| Weight | 2,726-lbs. (1,236 kg) |
| Dimensions | 175'' x 29'' x 34'' (794 mm x 737 mm x 864 mm) |
| Time to Full Rise | 45 seconds |
*The design, material, and specifications are subject to change without notice.
Optional Accessories (*Sold separately)
 |
 |
 |
 |
 |
||||
| WSA-100 | Steel Lift Pads | Frame Cradle Pads | Rubber Lift Pads |
MLS-16 |
Downloads
