Bendpak TSP-580V-601 5 Hp 80 Gallon Elite Air Compressor

BendPak

SKU:
BP-5179111
Condition:
New
Availability:
Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.
Shipping:
Free Shipping
Total Price:
MSRP: $4,314.00
$3,595.00
(You save  $719.00 )
Adding to cart… The item has been added

jmc-shipping-button.pngBendpak TSP-580V-601 5 Hp 80 Gallon Elite Air Compressor

TSP-580V-601 TSP-5 Patriot Series Air Compressor / 5 HP / 80-Gallon Vertical Tank (5179111)

The TSP-5 Patriot Series air compressor features an 80-Gallon vertical tank and 5 HP, low-RPM motor for high efficiency. Built for high productivity and lower operating costs, it produces more compressed air using an extremely efficient and low-energy-consuming components. Assembled in USA.

The TSP-5 is one of BendPak’s most popular ​assembled in USA air compressor models. High-quality, slow running cast iron compressor pumps deliver proven longevity in the most demanding conditions. Because they run at a slower RPM than most comparable units, they’re quieter, run cooler and cost less to operate. 100% cast iron pumps provide the quality and performance needed for heavy‐use applications like automotive and body repair to manufacturing and industrial service.

Features

  • UL, CSA, ASME​ certified
  • Extra-quiet, low-RPM pump
  • 5 HP energy‐efficient motor
  • Pressure switch ensures efficient operation at all times with no wasted energy
  • Cast‐iron pump and heads are more stable under heavy workloads and do not warp from heat like aluminum cylinders with pressed‐in sleeves
  • Cast‐iron Elite pump features simple splash lubrication for total reliability and a finned cylinder configuration that provides 360° cooling
  • Dual drive belts require less belt tension resulting in less load on pump bearings, longer belt life and low vibration
  • Fully‐enclosed belt guard
  • Anti-vibration pads included
  • Large surface area and cooling fins on cylinders and forced‐air after-cooler provides efficient heat dissipation for lower operating temperatures and dryer air. Compressor runs cooler, oil life is extended and maintenance is reduced
  • Precision honed cylinders increase efficiency and oil control
  • Oversized ductile iron crankshaft provides extra strength and longer wear
  • Tapered roller main bearings provide full contact and support of the crankshaft and needle‐type piston pin bearings properly distribute bearing loads
  • Precision balanced flywheel has forced‐air fan blades for optimum compressor cooling and life
  • Magnetic starter provides thermal overload protection and minimizes start loads providing long life and trouble‐free operation
  • ASME-rated safety valve protects the compressor from overpressure and safeguards the operator
  • Balanced flywheel and counterbalanced crankshaft provides vibration‐free operation
  • Readily accessible disc‐valves do not require disassembly of compressor piping for easy accessibility and reduced maintenance cost and downtime
  • Corrosion resistant tubing for coolers, separators and valves for longer life and reduced maintenance
  • High‐density, die‐cast aluminum alloy rods minimize reciprocating weight
  • Rugged cast iron oil reservoir has convenient sight gauge glass, large oil drain and convenient fill cap
  • Automatic pressure switch provides auto start and stop
  • Integrated pressure unloader valves are built into the intake valve assembly on the compressor head, reducing internal pump heat from initial start‐up compression
  • Pressure gauge with service valve
  • Oversize replaceable air filter

Specifications

 Motor  
 Horsepower:  5 HP
 RPM:  1,750 RPM
 Voltage:  208-230 Volt AC
 Phase:  1-Phase
 Hertz:  60 Hz
 Magnetic Starter:  No
 Amp Draw:  24
 Recommended Breaker:  40 Amp Breaker
 Noise:  72 dBA
 Pump  
 Style:  2-Stage / 2-Piston / Vertical
 Pump RPM:  625 RPM
 Material:  Solid Cast Iron
 Duty Cycle:  Continuous
 CFM:  17 CFM
 CFM Rated @:  175 PSI
 Max PSI:  175 PSI
 Oil Sight Glass:  Yes
 Pump Type:  Two-Stage
 Pump Drive:  Belt Drive
 Oil Type:  Oil Lubricated
 Oil System:  Full Pressure Lubrication
 Tank  
 Orientation:  Vertical
 Size:  80 gallon
 Outlet:  3/4" Fitting
 Electronic Drain Valve:  Yes
 Certification:  UL, CSA, ASME
 Dimensions  
 Width:  24" (610 mm)
 Depth:  71" (1803 mm)
 Height:  34" (864 mm)
 Shipping  
 Weight:  676-lbs. (306.6 kg)
 Dimensions:  44'' x 40'' x 75'' (1,117 mm x 1,016 mm x 1,905 mm)

 

Downloads

Manual

 

**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.