Bendpak RJ-7 7,000 Lb. Capacity, Sliding Bridge Jack
BendPak’s 7,000-lb. capacity rolling bridge jack is made for an HD-14 four-post lift. Each rolling jack comes complete with three safety-lock positions and stackable pad adapters to provide added clearance when needed.
- 7,000-lb. lifting capacity
- Rubber contact pads
- Stackable adapters
- High-pressure hydraulic power unit
- Optional air-line kit
- Lifting Capacity* 7,000 lbs. (3,175 kg)
- A - Max. Height + Pad Only: 18.8" (478 mm)
- B - Max. Height + Pad + Adapter: 21.8" (554 mm)
- C - Min. Height + Pad Only: 8" (203 mm)
- D - Min. Height + Pad + Adapter: 11" (279 mm)
- Time to Full Rise: 45 seconds
- F - Support Arm Width: 36" (914 mm) - 46" (1,168 mm)
- G - Max. Arm Reach: 56" (1,422 mm)
- H - Min. Arm Reach: 42" (1,067 mm)
- Motor: Air-Hydraulic Pump
- Noise: 45 dB
- Weight: 305
- Dimensions: 36" x 22" x 21" / 914 mm x 559 mm x 533 mm
**Bendpak charges taxes to California**
*Shipping is FREE to direct points within the 48-contiguous states.
**A 5% RATZ Surcharge may apply if shipping to a rural shipping point. Click here to check if you are in a RATZ zone
***It is the buyer's responsibility to unload the freight at their location.
****The Bendpak RJ-7 is an ALI Certified Lift. Click here to view its certification.