Bendpak Package Deal 4-Post Lift + 3D Aligner + Rolling Jack

SKU:
5175894
Condition:
New

Factory Shipped

Total Price:
$26,665.00
Shipping Calculated at Checkout
Shipping Calculated at Checkout

Factory Shipped

Bendpak Package Deal 4-Post Lift + 3D Aligner + Rolling Jack

This package deal includes: Package Deal: (1) HD-14LSXE + (1) 3DP4100R + (2) RBJ7000

Bendpak HDS-14LSXE 14,000-lb. Alignment Limo Extended Length Lift

The HDS-14LSXE alignment lift is designed for extendedlength vehicles, such as trucks and vans. The runways and overall length are extended by 30”. With runways now 229” in length, some very long vehicles can fit easily on this alignment lift. If your service bay demands these vehicle types, an extended length alignment lift from BendPak is absolutely necessary to perform long wheelbase alignments.

Features 

  • 14,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493.
  • Two runway lengths to choose
  • Heavy‐duty turn plates and integrated rear slip‐plates included
  • Multi‐position turn plate pockets
  • Automatic leveling system
  • Runways include rail‐kit for optional accessories
  • Electric/hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Internal “Anti-Sway” slider blocks in each column
  • Features oversize sheaves and heavy‐duty 1/2” aircraft cable
  • Rugged 1‐3/8” roller axles and oversize self‐lubricating cable sheaves
  • Multi‐position safety locks in each column with push‐button safety release
  • Runways adjust for different tread widths and feature non‐skid surface
  • Optional 7,000 pound capacity bridge jacks available (Model R​BJ7000)

Ranger 3DP4100R Target 3D Pro Imaging Aligner - Includes Set-Up & Training

The Target 3DPro wheel aligner increases productivity by allowing technicians to do more wheel alignments in less time compared to conventional systems. This wheel aligner is perfect for wheel service repair shops handling a high volume of wheel alignments, especially those who would like to see a dramatic increase in profitability. With minimal investment and reduced training, the Ranger Target 3DPro aligner expands your service potential and sends more profit to your bottom line. The ProSpec® feedback that assists technicians in diagnosing problems will help increase your customer satisfaction and improve shop efficiency. The Target 3DPro uses advanced imaging technology that delivers fast and accurate alignments.

 

 Features:

  • User-Friendly and Time Saving Features
  • Self-balancing, variable height camera lift system is built with precision bearing slides for easy adjustment.
  • Commercial-grade cameras are designed with full frame optical lenses that ensure accuracy and stability.
  • High-resolution drive-on approach camera provides full on-screen frontal view of vehicle driving on lift platforms.
  • Equipped with a large additional lower flat panel LCD monitor that provides operator with easy-to-read screen views, even from the rear underside of the vehicle. No need for separate portable hand-held monitors.
  • Interactive software provides demonstration screens that help the technician to easily proceed systematically through the adjustment process.
  • Rugged checkerboard shockproof wheel targets are drop-tested for worry-free handling and are built with anti-corrosion components capable of withstanding harsh working environments.
  • Deep Freeze™ Reboot-to-Restore Technology
  • Windows® 10 Mini PC Stick - Intel® Atom Quad Core CPU, 2GB RAM, 32GB Memory, Bluetooth 4.0.
  • In less than 2 minutes, technicians can complete total vehicle setup (including run-out compensation) and obtain full geometry alignment readings.
  • Exclusive One-Touch enhanced software interface results in increased productivity.
  • A web-based application that can be accessed from iPhone™ and iPad™ users to enjoy full wireless remote operation.
  • A reduction in the number of vulnerable electric components results in reduced downtime, lower operating costs and a longer service lifecycle of the equipment.
  • Superior screen graphics with vibrant animation and displays deliver easy to understand visuals and instruction.
  • Alignment functions and measurements are controlled via the mouse, keyboard or remote control.
  • Self-explanatory graphic user surface provides simple understanding.
  • Compatible with low ride-height vehicles or those with ground-effects.
  • Self-centering wheel-clamp adaptors cover an extended range of vehicles.
  • Cordless design removes hassle of connecting cables.
  • Technician has the option to customize alignment units of measure, accuracy, language, etc.
  • Technician has a choice of rolling or lifted run-out modes.
  • Features self-diagnostic help screen and system information.
  • Continuous checking ensures accurate toe measurements.
  • On-screen display indicates if sensor leveling is required.
  • Vehicle adjustment illustrations and multiple adjustment bar graphs.
  • Adjustment illustrations provide illustrated diagrams and instructional information of recommended OEM adjustment methods.
  • Valuable customer information can be conveniently stored in the database allowing shop personnel to quickly reference previous alignment work orders.
  • Before and after measurements can be printed in full-color to explain service and record work performed. 

Bendpak RBJ7000 7,000 Lb. Capacity, Rolling Bridge Jack

BendPak’s 7,000-lb. capacity rolling bridge jack is made for an HD-14 four-post lift. Each rolling jack comes complete with three safety-lock positions and stackable pad adapters to provide added clearance when needed.

 

Specifications:

  • 7,000-lb. lifting capacity
  • Rubber contact pads
  • Stackable adapters
  • High-pressure hydraulic power unit
  • Optional air-line kit

Bendpak Two Post and Four Post Lift Warranty

TWO‐POST LIFTS/FOUR‐POST LIFTS LIMITED WARRANTY

Better Products – Better Service – Better Value

LIMITED WARRANTY. Subject to the limitations of set forth below, Warrantor warrants that the Product sold hereunder conform to Warrantor's published specifications. WARRANTOR MAKES NO REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESS OR IMPLIED, WITH RESPECT TO THE GOODS, WHETHER AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.
  • Five Years (60‐Months) Warranty on the lift structure
  • Two Years (24‐Months) Warranty on the hydraulic cylinder(s) and power unit
  • One Year (12‐Months) Warranty on operating components
  • One Year (12‐Months) Warranty on electrical components (excluding power unit)
  • One Year (12‐Months) Labor Warranty on site or at factory*
  • One Year (12‐Months) Free‐Shipping** on ground‐freight charges related to warranty performance

Limited Warranty

1. Who gives this warranty (Warrantor): BendPak Inc., 1645 Lemonwood Dr., Santa Paula, CA 93060
2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
3. What products are covered by this warranty (Product): Any BendPak Two‐Post or Four‐Post Vehicle Service Lift***
4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
5. What is not covered under this warranty:

  • Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service Product in accordance with instructions provided in the owner’s manual(s) supplied.
  • Any damage caused by overloading Product beyond rated capacity.
  • Items or service normally required to maintain the Product, i.e. lubricants, oil, etc.
  • Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship.
  • Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings.
  • Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants.
  • Rusted components due to improper maintenance or corrosive environments.
  • Cosmetic defects that do not interfere with Product functionality.
  • Damage due to incorrect voltage or improper wiring.
  • Any failure that results from improper installation or use not according to specifications.
  • Damage caused by disasters such as fire, flood, wind, and lightning.
  • Damage caused by unauthorized attachments or modifications.

6. Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor's option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. Warrantor will pay reasonable labor costs for the first 12 months only.  

7. Responsibilities of Purchaser under this warranty/ notice of claims:

  • Provide dated proof of purchase and maintenance records.
  • In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12‐months, must be borne by the Purchaser.
  • Use reasonable care in the operation and maintenance of the Products as described in the owner's manual(s).
  • Immediately upon receipt of the Product, Purchaser shall inspect the same. Any claim for shortage must be made within ten days after Purchaser's receipt. All other claims, including claims for alleged defective Product, must be made within fifteen days after Purchaser learns of the facts upon which such claim is based, but in no event later than the applicable one, two or five year period specified above for the specified component(s). All claims not made in writing and received by Seller within the time periods specified above shall be deemed waived. With respect to any defects incapable of discovery until in use, all claims for any damages or losses as a result of such defects shall be deemed waived unless made in writing and received by Seller within fifteen days after Purchaser learns of the alleged defect giving rise to the claim and after the expiration of said periods, but in no event later than the applicable one, two or five year period specified above for the specified component(s). Purchaser expressly assumes all liability for all such damages or losses, irrespective of any use which shall have taken place or whether the alleged defect shall have occurred or been discovered prior to expiration of such periods.

8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.

9. *As determined by Warrantor in its sole discretion**Free‐shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote addresses. ***For all BendPak brand Two‐Post or Four‐Post Vehicle Service Lifts (excluding specialty lifts, high rise, commercial parking, material handling, or models for particular purpose) manufactured on or following 1/1/2011.

Frequently Bought Together

Please choose options for all selected products