Bendpak HDSO-14P 14,000-Lb. Capacity Open Front Car Lift

$8,880.00
$8,880.00
$7,430.00
(You save $1,450.00 )
Brand:
SKU:
5175152
Condition:
New
Availability:
Factory Shipped
Shipping:
Free Shipping
  • Bendpak DP-30 18 Gallon Rolling Drain Pan

Bendpak Hdso-14P 14,000-Lb. Capacity Open Front Car Lift (5175152)

The HDSO14P is a legendary 14,000-lb. capacity open-front four-post car lift that allows easy entry and exit beneath a vehicle. It is available with optional drive-thru ramps, drip trays and rolling jacks. The HDSO14P is an open-front fourpost lift that features clear entry upfront, providing easy vehicle access. A generous 14,000-lb. lifting capacity and extended runways allow you to service a wide variety of vehicles, ranging from small cars to full-size trucks.

 Features:

  • 14,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Huge cable sheaves reduce wear and tear
  • Extremely convenient open-front design for easy access
  • Extended runway length for servicing
  • Longer approach ramps for low ground clearance vehicles
  • Electric / hydraulic power system
  • Runways include rail-kit for optional accessories
  • Runways adjust for different tread widths
  • Automatic leveling system with multiple auto-leveling locking positions
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks, and sheaves
  • Internal anti-sway slider blocks in each column
  • Pneumatic push-button safety release
  • Features heavy-duty 1/2" aircraft cable
  • Safety locks enclosed in columns minimize pinch points
  • Oversized sheave diameter reduces cable fatigue
  • Runways feature non-skid surface
  • Rugged, self-lubricating cable sheaves
  • Features 1-3/8” sheave axles
  • Multi-position safety locks in each column
  • Independent backup slack-cable safety latches
  • Includes fully adjustable lock stops for precise leveling
  • Integrated rolling bridge airline kit option available
  • Roll-back kit options available
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional 7,000-lb. capacity rolling jacks available (Model RJ-7

Specifications: 

Capacity

  • Lifting Capacity* 14,000 lbs. (6,350 kg)
  • *Max Capacity / Front Axle 7,000 lbs. (3,175 kg)
  • *Max Capacity / Rear Axle 7,000 lbs. (3,175 kg) 

Rise

  • A - Min. Runway Height: 7.625" (194 mm)
  • B - Max. Rise: 70" (1,778 mm)
  • C - Max. Lifting Height: 77.625" (1,972 mm)
  • Time to Full Rise: 60 seconds
  • D - Overall width (FRONT) 143” (3,632 mm)
  • E - Overall Width (REAR) 130” (3,301 mm)
  • F - Outside Length 215.5" (5,473 mm)
  • G - Overall Length 244" (6,198 mm)
  • H - Height of Columns (FRONT) 105" (2,664 mm)
  • I - Height of Columns (REAR) 103” (2,613 mm)
  • J - Width Between Columns (FRONT) 123” (3,124 mm)
  • K - Width Between Columns (REAR) 120” (3,046 mm)
  • L - Drive-Thru Clearance 97” (2,464 mm)
  • M - Runway Width 20" (508 mm)
  • N - Length of Runways 199" (5,054 mm)
  • O - Width Between Runways 45" (1,143 mm)
  • P - Runway Centerline 65" (1,651 mm)
  • Q - Outside Edge of Runways 85" (2,159 mm)

Minimum Wheelbase

  • Rated Capacity: 140" (3,556 mm)
  • 75% Capacity: 120" (3,048 mm)
  • 50% Capacity: 100" (2,540 mm)
  • 25% Capacity: 80" (2,032 mm)

Locking

  • Locking Positions: 13
  • Lock Spacing: Every 4" (102 mm) 

Power Unit

  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Noise: 45 dB

Accessories: 

WSA-100    RJ-7    DP-30

       WSA-100                     RJ-7                            DP-30

*Shipping is FREE to direct points within the 48-contiguous states.

**Bendpak charges taxes to California**

**A 5% RATZ Surcharge may apply if shipping to a rural shipping point. Click here to check if you are in a RATZ zone

***It is the buyer's responsibility to unload the freight at their location.

****The Bendpak HD-9XL is an ALI Certified Lift. Click here to view its certification. 

BendPak 2-Post Lifts and 4-Post Lifts are warranted for five years on equipment structure, to be free of defects in material and workmanship. Power units, hydraulic cylinders, and all other assembly components such as turnplates, slip plates, cables, chains, valves, switches etc. are warranted for one year against defects in material or workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

Bendpak 5-2-1 Warranty