BendPak HD-7500BLX 7,500 Lb. Capacity / Vehicle & Boat Storage Lift / 82" Rise

BendPak

SKU:
BP-5175315
Condition:
New
Availability:
Free Shipping is valid for commercial locations within the 48 Continental U.S. only. We will contact you if Tax and shipping surcharges apply.
Shipping:
Free Shipping
Total Price:
MSRP: $8,274.00
$6,895.00
(You save  $1,379.00 )
Adding to cart… The item has been added

jmc-shipping-button.pngBendPak HD-7500BLX 7,500 Lb. Capacity / Vehicle & Boat Storage Lift / 82" Rise

Avoid rust, blemishes, rot, weather damage and more with BendPak's longer, extended-height HD-7500BLX boat lift. It's the safest, most cost-effective way to dry dock your boat.

Never trust your precious boat to the unpredictability of the water, nor should you pay for dry docks and/or yard storage. Salt water corrosion, barnacles, rust damage, rub marks, coating blemishes, rot and cold weather can do irreversible harm caused to your boat's engine and interior. The longer you go without a boat lift, the more you leave yourself open to catastrophe.

BendPak has the perfect solution: Keep your boat up in the air and out of the water. Because it features adjustable runways that accommodate cars and trucks, the HD-7500BLX pulls double-duty as a professional-grade car lift for ground vehicles.

Features 

  • 7,500-pound lifting capacity
  • Two different lifting heights to choose from
  • Electric / hydraulic power system
  • Internal anti-sway slider blocks in each column
  • Both models feature heavy-duty 3/8" aircraft cable
  • Multi-position safety locks in each column
  • Ramps feature non-skid surface
  • Optional 4,500-lb. capacity jack available (RBJ-4500)
  • Two different ramp lengths to choose
  • Runways include rail-kit for optional accessories
  • Single hydraulic cylinder underneath runway
  • Over-sized self-lubricating cable rollers
  • Rugged 1-1/4" roller axles
  • Adjustable lock ladders
  • Push-button pneumatic safety release
  • Durable powder coat finish

Specs

 Capacity  
 Lifting Capacity*  7500 lbs. (3402 kg)
 *Max Capacity / Front Axle  3750 lbs. (1701 kg)
 *Max Capacity / Rear Axle  3750 lbs. (1701 kg)
 Rise  
 A - Min. Runway Height:  5" (127 mm)
 B - Max. Rise:  82" (2083 mm)
 C - Max. Lifting Height:  87" (2210 mm)
 Time to Full Rise:  55 seconds
 Outside Dimensions  
 D - Overall Width:  132" (3353 mm)
 E - Outside Length:  198" (5029 mm)
 F - Overall Length:  224" (5690 mm)
 G - Height of Columns:  100" (2540 mm)
 Inside Dimensions  
 H - Width Between Columns:  122" (3099 mm)
 I - Drive-Thru Clearance:  108,5" (2756 mm)
 Runways  
 J - Runway Width:  19" (483 mm)
 K - Length of Runways:  188,5" (4788 mm)
 L - Width Between Runways:  49,5" (1257 mm) or 69,5" (1765 mm)
 M - Runway Centerline:  68,5" (1740 mm) or 88,5" (2248 mm)
 N - Outside Edge of Runways:  87,5" (2223 mm) or 107,5" (2731 mm)
 Minimum Wheelbase  
 Rated Capacity:  135" (3429 mm)
 75% Capacity:  115" (2921 mm)
 50% Capacity:  95" (2413 mm)
 25% Capacity:  80" (2032 mm)
 Locking  
 Locking Positions:  15
 Lock Spacing:  Every 4" (102 mm)
 Power Unit  
 Motor:  220 VAC / 60 Hz / 1 Ph
 Noise:  45 dB
 Shipping  
 Weight:  1,980 lbs. (898.1 kg)
 Dimensions:

 190'' x 22'' x 39'' (4,826 mm x 558 mm x 990 mm)

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

HD-7500BLX (5175315) 7,500-lb. Capacity / Vehicle and Boat Storage Lift / 82" Rise 

 

 

Downloads

Manual
Specs Sheet

 

**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.