Bendpak HD-14T 14,000 Capacity Tall Lift/82" Rise 4 Post Lift
The industrial-quality HD-14T is a full-sized lifting force designed specifically for parking higher-profile vehicles beneath the raised platform. With this four-post lift, you can push 14,000 lbs. worth of automobile into the air without breaking a sweat.
Features
- 14,000-lb. lifting capacity.
- Extra lift height.
- Long-style approach ramps for low ground clearance vehicles.
- Runways include rail-kit for optional accessories.
- Single hydraulic cylinder mounted underneath runway.
- Fully enclosed lifting cables, safety locks, and sheaves.
- Internal anti-sway slider blocks in each column.
- Pneumatic push-button safety release.
- Features heavy-duty 1/2" aircraft cable.
- Safety locks enclosed in columns minimize pinch points.
- Hardened-steel sheaves with self-lubricating bearings.
- Multi-position safety locks in each column.
- Customizable power unit location.
- Approach ramps incorporate built-in rear-wheel chocks.
- Independent backup slack-cable safety latches.
- Optional RJ-7 air-hydraulic bridge jacks increase service capability.
Specifications
Capacity | |
Lifting Capacity* | 14.000 lbs. (6350 kg) |
*Max Capacity / Front Axle | 7000 lbs. (3175 kg) |
*Max Capacity / Rear Axle | 7000 lbs. (3175 kg) |
Rise | |
A - Min. Runway Height: | 7,625" (194 mm) |
B - Max. Rise: | 82" (2083 mm) |
C - Max. Lifting Height: | 86,5" (2197 mm) |
Time to Full Rise: | 65 seconds |
Outside Dimensions | |
D - Overall Width: | 127,5" (3239 mm) |
E - Outside Length: | 205" (5207 mm) |
F - Overall Length: | 234" (5944 mm) |
G - Height of Columns: | 101" (2565 mm) |
Inside Dimensions | |
H - Width Between Columns: | 115,5" (2934 mm) |
I - Drive-Thru Clearance: | 98" (2489 mm) |
Runways | |
J - Runway Width: | 20" (508 mm) |
K - Length of Runways: | 195" (4953 mm) |
L - Width Between Runways: | 34,5" (876 mm) or 41,5" (1054 mm) |
M - Runway Centerline: | 54,5" (1384 mm) or 61,5" (1562 mm) |
N - Outside Edge of Runways: | 74,5" (1892 mm) or 81,5" (2070 mm) |
Minimum Wheelbase | |
Rated Capacity: | 140" (3556 mm) |
75% Capacity: | 120" (3048 mm) |
50% Capacity: | 100" (2540 mm) |
25% Capacity: | 80" (2032 mm) |
Locking | |
Locking Positions: | 16 |
Lock Spacing: | Every 4" (102 mm) |
Power Unit | |
Motor: | 220 VAC / 60 Hz / 1 Ph |
Noise: | 45 dB |
Shipping | |
Weight: | 2,450-lbs. (1,111.3 kg) |
Dimensions: | 200'' x 21'' x 42'' (5,080 mm x 533 mm x 1,066 mm) |
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to function. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Accessories (Sold separately)
**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.