BendPak 4,500 Lb. Capacity, Easy-Roll Wheels, LOW-PROFILE Rolling Bridge Jack
The RJ45LP rolling bridge jack is ideal for any shop with the HD-7 series or HD-9 series four-post lift model, arguably the most popular and versatile four-post car lifts on the market. Featuring an impressive low-profile design, the RJ45LP lift pads sit just 4.25" from the runway surface and is equipped with easy-to-roll wheels for effortless gliding down the runway track. For those with an HD-7 or HD-9 four-post lift that are in need of wheel service capability, the RJ45LP offers extreme versatility and convenience, in a low-profile package.
The RJ45LP and RJ45W rolling bridge jacks are essentially the same except for two specifications: First, the RJ45LP minimum drive-over height is 4.25" and the RJ45W minimum drive-over height is 4.5". Second, the RJ45LP maximum arm reach is 61" wide and the RJ45W maximum arm reach is 57" wide.
Features
- 4,500-lb. lifting capacity
- Easy-Roll Wheels
- Low-profile minimum drive-over height, wider reach lifting points
- Rubber contact pads
- Stackable adapters
- High-pressure hydraulic power unit
- Optional air-line kit
- Low-Profile Bridge Jack
- Easy-Roll Wheels Come Standard
- Rubber contact pads
- Stackable adapters
- High-pressure hydraulic power unit
- Three lock levels
Specifications
Lifting Capacity | 4,500 lbs. (2,041 kg) |
Suitable Lift Model(s) | HD-7 Series, HD-9 Series, GP-9 series |
Min. Drive-Over Height* | |
Pad Only: | 4.25" (108 mm) |
Pad + 2.75" Adapter: | 7" (178 mm) |
Pad + 5.5" Adapter: | 9.75" (248 mm) |
Max. Lifting Height* | |
Pad Only: | 15.25" (387 mm) |
Pad + 2.75" Adapter: | 18" (457 mm) |
Pad + 5.5" Adapter: | 21" (533 mm) |
Reach | |
Support Base Width: | 35.5" (902 mm) - 46.5" (1,181 mm) |
Max. Arm Reach: | 61" (1,549 mm) |
Min. Arm Reach: | 42" (1,067 mm) |
Time to Full Rise: | 55 seconds |
Pump: | Air/Hydraulic |
Air Pressure: | 125 PSI (10-25 CFM) |
Max. Operating Hydraulic Pressure: | 2,490 PSI |
Power Requirement: | None |
Shipping Weight: | 306 lbs. (139 kg) |
Shipping Dimensions: | 41.25" x 25" x 13" (1,048 mm x 635 mm x 330 mm) |
* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.
Downloads
**Bendpak charges sales tax in California**
***It is the buyer's responsibility to unload the freight at their location.