Baileigh BB-7210H Heavy Duty Hydraulic Box and Pan Brake
The BB-7210H hydraulic sheet metal box and pan brake can bend 10 gauge mild steel sheet metal across its full 6-foot (72”) length. It also handles smaller gauges just as easily.
Features
- Maximum bend angle of 135°.
- 1” beam adjustment.
- Box and pan brake made with top-quality industrial-grade hydraulics for reliability over many years of use.
- You can operate the hydraulic system in manual or semi-automatic mode to lift the leaf.
- Adjustable bend auto-stop makes production runs more efficient and ensures repeatability.
- 5 hp motor controls all hydraulic functions and runs on 220-volt 3-phase power.
- Hydraulic motor attached to a cam lifts and clamps the beam to deliver the extreme pressure required to bend 10 gauge mild steel.
- Includes 17 hardened 3-piece fingers (6 of 3", 3 of 4", 6 of 5", and 2 of 6") to adjust for just about any size box or pan.
- 6” maximum box depth.
- Removable bending apron lets you get closer between bends.
- Fully-welded top beam and bending leaf, stabilized with solid steel support rods, keep deflection and twisting to a minimum when you’re bending at full capacity.
Specifications
| Item Number | BB-7210H |
| Motor | 5 hp |
| Min Reverse Bend | .984" |
| Thickness (SS) | 10 ga. (12 ga.) |
| Box Depth | 6" |
| Beam Adjustment | 1" |
| Bend Angle | 0 – 135° |
| Finger Sizes | 3" – 4" – 5" – 6" |
| Power | 220V / 3-phase |
| Shipping Weight | 5280lbs |
| Length | 72” |
| Shipping Dimensions (Inches) | 110x44x71 |
*Specifications subject to change without notice.
WARNING CA Proposition 65 Message
Warranty Information
Limited Warranty: Seller warrants to the original end-user that the Goods manufactured or provided by Seller under this Agreement shall be free of defects in material or workmanship for a period of twelve (12) months from the date of purchase, provided that the Goods are installed, used, and maintained in accordance with any instruction manual or technical guidelines provided by the Seller or supplied with the Goods, if applicable. The original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of the warranty period. The original end-user must also obtain a RGA from Seller prior to returning any Goods to Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective Goods or refund to the original end-user the purchase price for such defective Goods. Goods are not eligible for replacement or return after a period of 30 days from date of receipt. The foregoing warranty is Seller’s sole obligation, and the original end-user’s exclusive remedy, with regard to any defective Goods. This limited warranty does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, abuse, neglect, or accidents, (e) defects or damage to the Goods resulting from improper or unauthorized alterations, modifications, or changes, (f) any Goods that have not been installed and/or maintained in accordance with the instruction manual or technical guidelines provided by Seller, and (g) labor and costs associated with repair or installation of parts supplied under warranty.
Exclusion of other warranties: The foregoing limited warranty is in lieu of all other warranties, express or implied. Any and all other express, statutory or implied warranties, including but not limited to, any warranty of merchantability or fitness for any particular purpose are expressly disclaimed. No warranty is made which extends beyond that which is expressly contained herein.
If you have any questions about warranty information, please contact us at 800-562-4791
