AMH 28.CPS185 180AL Aluminum Dent Repair Station
The service center is a mobile workbench specially designed to provide a productive workplace for the CompuSpot 180AL operator in an aluminium clean room environment.
Features
The workbench centralizes all the operator's tools and utilities:
- 110V & 220V electrical outlets.
- Compressed air outlets.
- Front and side perforated panels for tool storage.
- Welding gun & Cable supports.
- Sliding drawer & storage shelves.
- Scratch resistant table top coating.
Specifications
CompuSpot 180AL technical information | |
Nominal Input Power | 115 VAC – 230 VAC |
Fuse or Breaker | 10A – 6A |
Frequency | 50Hz – 60Hz |
Capacitance | 66mF |
Welding Energy | 50J/40V, 1600J/220V |
Weight | 38 lbs (17Kg) |
CompuSpot 180AL Dimensions | 14 x 8 x 9 in (356 x 229 x 203 mm) |
Workbench Technical Information | |
Approximate Shipping Weight | 160lbs (72Kg) |
Workbench Dimensions | 21 x 19 x 73 in (521 x 470 x 1854mm) |
Comes with:
Dent puller CompuSpot 180AL | Aluminium stud welding gun with integrated ground system | Straightning bar | Safety goggles | |||
(28.CPS181) | (01.PS.04.10) | (13.155.30.26) | (16.178.00.18) | |||
Hand lifter | 2 Finger bear claw | 5 Finger bear claw | 8 Finger bear claw | |||
(13.155.30.05) | (13.155.10.42) | (13.155.10.46) | (13.155.10.52) | |||
Stainless steel brush | Aluminium hammer & Dolly kit | Heat gun | Infrared laser thermometer sensor | |||
(16.250.0.10) | (16.178.05.10) | |||||
Stud holder 4mm 1 unit | Threaded pulling studs M4x15 200pcs | Puller mandrel 4mm 6 units | ||||
(04.PS.18.04) | (16.178.01.24) | (08.175.00.54) | ||||
Stud holder 5mm 1 unit | Threaded pulling studs M5x15 200pcs | Puller mandrel 5mm 6 units | ||||
(04.PS.18.05) | (16.178.01.25) | (08.175.00.55) | ||||
Stud holder 6mm 1 unit | Threaded pulling studs M6x15 200pcs | Puller mandrel 6mm 6 units | ||||
(04.PS.18.06) | (16.178.01.26) | (08.175.00.56) |