AMGO Hydraulics XL-7 7000 Lbs Low Profile Scissor Lift
If you have a growing workload but limited space, then the AMGO XL-7 Scissors Lift is the perfect choice for you. AMGO’s Full Rise XL-7 Scissors Lift works great for raising vehicles high enough to walk underneath, and has a low profile design of only 4 ½ inches, maximizing limited bay space. The XL-7 is made stronger, more versatile, and easier to use and can lift 7,000lbs.
Features
• 24V control system for safety operation
• 2-Dual synchronous cylinders are applied to assure the lifting level on both platforms
• Hydraulic cylinders built with hose burst valves for safety protection
• Both mechanical and hydraulic locking system. This makes it one of the safest small scissors lift in the world
• A safety stop device at the height of 11 7/8″(300mm), both control buttons are needed to lower the lift to ground, tone alarm for added safety.
• Five-year Warranty on Steel Components, Three-year Warranty on Hydraulic Parts and Two Years on Electrical Components.
Specifications
| Model | XL-7 |
| Lifting Capacity | 7,000 lbs |
| Lifting Time | 42 S |
| A1: Max. Lifting Height | 78 3/4″ (2000mm) |
| A2: Minimum Height | 4 1/2″ (115mm) |
| B: Overall Length(Inc Ramps) | 80″ (2032mm) |
| C: Runway Length | 57 5/8″ (1464mm) |
| D: Overall Width | 76 3/4″ (1950mm) |
| E: Width Between Runways | 29 1/2″ (750mm) |
| Motor | 2.0HP,220V/60Hz,single phase |
| Gross Weight | 1,949 lbs (884kg) |
Shipping Information
Downloads
Warranty information.
AMGO offers one of the best product warranties in the industry from the original factory commercial invoice date in the industry as follows:
1.Steel structure components(including Columns,Carriage,,Lifting Arms, Top Beam, Floor Cover,Platform,Cross Beam,Car Drive-in Ramp, Scissor,baseframe etc.) warranty for five years.
2.Hydraulic parts (including cylinders, oil seal, oil hose, fitting etc.)warranty for two years.
3.Other parts(no including consumption parts such as rubber pad),electrical components, power unit warranty for one year.
Warranty procedure:
In order to start a warranty claim, you need fill out completely (including date of purchase) the warranty card attached below, and then send it to technical.support@amgohyd.com. If this information is not provided, the factory will not support the claim.
Click here to download the warranty card
