BendPak XR-12000A Quatra™ 12,000-lb. Capacity Alignment Lift 

Bendpak XR-12000A Quatra™ 12,000-lb. Capacity, Scissors Wheel Alignment Lift

Quatra™ series lifts by BendPak™ is the next evolution in industrial strength lifting technology. 12,000-pounds of true vertical lifting power for a more compact footprint to better accommodate smaller service bays and work areas. At the same time, the unique quad-opposing scissors design eliminates restrictive arm structures found on other scissors, giving the technician an unprecedented freedom of movement beneath the lift. The XR-12000A provides you full, unobstructed vehicle access and effortless workspace entry and exit. More space means more freedom and efficiency than you thought possible beneath a car lift.

Key Features 

• 12,000-lb. lifting capacity
• Extended runway design for greater vehicle capacity
• Integrated recessed full-floating front radius plates and over-sized rear slip-plates
• Turn plate pockets feature adjustable leveling bolts for infinite turn plate leveling
• Durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection
• Extendable, hinged, collapsible, and stowable approach ramps 
• Multi-position runway work steps 
• Non-skid runways provide sure grip for vehicles and technicians 
• Dependable electric/hydraulic power system 
• Cylinders feature integrated velocity fuses to control sudden descent
• Power console features simple operator controls 
• Open front design with clear center, sides and rear 
• Multi-position automatic leveling system 
• Quad automatic safety locks with pneumatic push-button release 
• Collapsible front tire stops clear for low vehicle skirts and alignment instrumentation 
• Lubricated-for-life bearings on all pivot points 
• Rugged steel legs and formed steel runways 
• Turned, ground, polished and hardened zinc plated axle pins 
• Grease nipples on all moving pins and bearings 
• High efficiency hydraulic power unit provides faster raising and descent times 
• Easy access to hydraulic/electrical components for simple routine servicing 
• Easy to use and understand operator controls 
• Power unit console with easy access front panel 
• Can be flush mounted or recessed

Optional Equipment

• Optional 6,000-pound capacity rolling jacks (model RJ-6) make a great addition to increase service capacity. Each jack has telescoping arms and frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump requiring a maximum pressure of 125 PSI and 10-20 CFM.
• An integrated rolling bridge airline kit is available that installs neatly within the runway to create a more tidy hose routing solution for single or dual jack purpose.
• The XR-12000A is equipped with an intelligent hydraulic regulating manifold featuring four, two-position ball valves to balance hydraulic pressure accurately between the master and slave cylinders for precise, equalized lifting of the runways. The manifold valve assembly is located at the power console with removable cover for simple routine maintenance and adjustment.

SPECIFICATIONS

• Lifting capacity: 12,000 lbs. / 5,443 kg
• Overall width: 86" / 2,184 mm
• Overall length / approach ramps extended: 296-1/2" / 7,531 mm
• Overall length / approach ramps collapsed: 276-1/2" / 7,023 mm
• Overall length / approach ramps stowed: 242-1/2" / 6,512 mm
• Runway width: 24" / 610 mm
• Width between runways: 37-1/2" / 952 mm
• Length of runways: 219-1/2" / 5,575 mm
• Min. 4-wheel alignment: 85" / 2,159 mm
• Max. 4-wheel alignment: 160" / 4,064 mm
• Max. 2-wheel alignment: 194" / 4,928 mm
• General service wheelbase: 194" / 4,928 mm
• Min. runway height: 11-1/4" / 286 mm
• Max. rise: 68" / 1,727 mm
• Max. lifting height: 74" / 1,880 mm
• Min. wheelbase @ rated capacity: 155" / 3,937 mm
• Min. wheelbase @ 75% capacity: 135" / 3,429 mm
• Min. wheelbase @ 50% capacity: 110" / 2,794 mm
• Min. wheelbase @ 25% capacity: 90" / 2,286 mm
• Locking positions: 13" apart
• Standard Motor: 220 VAC / 60 Hz / 1 Ph

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.