Bendpak XPR-12FDL 12,000 Lb. Capacity 2 Post Lift Floorplate, Direct-Drive
12,000-lb. Capacity / Two-Post Lift / Floorplate / Direct-Drive / Triple-Telescoping Arms
If you appreciate the superior quality of a BendPak XPR-9 or 10 series two-post lift but need more lifting power, the XPR-12FDL is an open-top car lift that’s packed with pure, brutish muscle. Like its Clearfloor sister-lift, it offers superior Direct-Drive performance.
The XPR-12FDL two-post lift is the perfect lifting application for everything that falls in its weight class. Two robust posts are capable of raising some truly massive trucks and SUVs. This might be classified as our “medium-duty” lift, as it covers almost every vehicle in the homeowner/residential arena. It also lifts some commercial vans and trucks, including highrise vehicles. The XPR-12FDL is an open-top design. An open top car lift does not have a crossbar over the top of the lift, which is desirable for taller vehicles. The hydraulic lines run on the floor, under a floorplate, between the posts.
Features
- 12,000-lb. lifting capacity.
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493.
- Open-top eliminates overhead obstruction.
- Single-piece columns.
- Single-point safety release.
- Drop-end arms provide a lower pad height.
- Dual direct-drive hydraulic cylinders.
- Oversized 53" tall carriage for superior strength and durability.
- Large, 25" x 22" A36 steel base plate.
- Electric / hydraulic power system.
- Oversized A36 steel base plates.
- Self-lubricating dura-glide UHMW polyethylene bearing system.
- Safety locks in each column spaced every 3".
- Plated arm restraints and arm pins for rust prevention.
- Heavy-duty 1/2" aircraft-quality equalizer cables.
- Oversized 6" cable sheave diameter reduces cable fatigue.
- 16-piece specialty adapter set includes four 6" stackable adapters, four 3" stackable adapters, four polyurethane contact pads and four frame cradle pads.
- Front and rear triple-telescoping arms provide increased range for lifting point access.
- Versatile drop-in contact pads with stackable adapters.
Specifications
Lifting Capacity | 12,000 lbs. (5,443 kg) |
*Max Capacity / Front Axle | 6,000 lbs. (2,722 kg) |
*Max Capacity / Rear Axle | 6,000 lbs. (2,722 kg) |
A - Rise | 69" (1,753 mm) |
B - Rise + Pad Only | 74" (1,880 mm) |
C - Rise + Pad + 63 mm Adapter | 79" (2,007 mm) |
D - Min. Height + Pad | 5" (127 mm) |
E - Height Overall | 144" (3,658 mm) |
F - Width Overall | 155" (3,937 mm) |
G - Outside Columns | 146" (3,708 mm) |
H - Inside Columns | 118" (2,997 mm) |
I - Drive-Thru Clearance | 103" (2,616 mm) |
J - Floor To Overhead Switch | 147" (3,734 mm) |
K - Front Arm Reach: (MIN) | 39" (991 mm) |
K - Front Arm Reach: (MAX) | 59" (1,499 mm) |
L - Rear Arm Reach: (MIN) | 39" (991 mm) |
L - Rear Arm Reach: (MAX) | 59" (1,499 mm) |
Max Load Per Arm | 3,000 lbs. (1,361 kg) |
L - Height | 2" (51 mm) |
M - Width | 8.5" (216 mm) |
Motor | 220 VAC / 60 Hz / 1 Ph |
Noise | 90 dB |
Shipping Weight | 2,530-lbs. (1,147 kg) |
Dimensions | 151'' x 29'' x 46'' (3,835 mm x 737 mm x 1,168 mm) |
Time to Full Rise | 55 seconds |
Optional Accessories (*Sold separately)
|
|
|
|
|
||||
WSA-100 | MLS-16 | Steel Lift Pads |
Frame Cradle Pads | Rubber Lift Pads |
Downloads